PDA

View Full Version : i have a challenge for you all.


rob_h
05-01-2007, 03:36 PM
i was incredible bored and decided to make me up a car so i drew the front and back,
below:

as from experience i always mess up on the side of cars, so...

draw it from the side, either on paper or as a toon on photoshop.

http://www.photoshopchop.com/forum/upload/imagehosting/89984643682665e4e.bmp

http://www.photoshopchop.com/forum/upload/imagehosting/899846436827150bb.bmp

Mike Minnillo
05-01-2007, 03:47 PM
i like the looks of this car. unfortunately, i have no skill when it comes to pen and paper.

andy2200a
05-01-2007, 04:33 PM
Here we go fella wot u fink bob?? it were only a quick shot but still i fink it reasonably good

wot u fink lad?


http://www.photoshopchop.com/forum/upload/imagehosting/thum_91024637a3ebebc53.jpg (http://www.photoshopchop.com/forum/vbimghost.php?do=displayimg&imgid=417)

rob_h
05-01-2007, 04:58 PM
not bad andy lol compared to normal. but it aint suposed to be convertible lol

andy2200a
05-01-2007, 05:00 PM
ta morph


frm ur drawin it looks like 1 of those lift tops like a lambo and regards to the 2nd bit of ur message i cba lol i mite do if i am really bored

chopperkidd44
05-01-2007, 05:57 PM
I'll try it. seeing as though i want to go to school for transportation design

chopperkidd44
05-01-2007, 08:38 PM
The car is in my opinion...kinda a mix of maserati, lamborghini, and ferrari. Maybe a little of the Opel Speedster in the back.

VipFREAK
05-01-2007, 08:45 PM
I accept... but it probably won't be done this week. I'm doing 3/4.

chopperkidd44
05-01-2007, 08:46 PM
Mirror is a litte crappy and im still getting the hang of shading. Here u go though. Side views are my specialty

http://www.photoshopchop.com/forum/upload/imagehosting/127694637de754d3d0.jpg

joemomma95
05-01-2007, 10:37 PM
ta morph


frm ur drawin it looks like 1 of those lift tops like a lambo and regards to the 2nd bit of ur message i cba lol i mite do if i am really bored


I must be losing it, I can't read this...

VipFREAK
05-01-2007, 10:56 PM
Quick sketch... turns out I can somewhat draw today. I'm not being egotistical, it's really true sometimes I can't draw to save my life

http://img107.imageshack.us/img107/2408/kjtg6.jpg

Carty
05-01-2007, 11:05 PM
haha I love how this kid tells us to draw the car from the side, and then tells us that what we draw looks wrong... well how are we supposed to know what you see in your head huh??

joemomma95
05-01-2007, 11:16 PM
Quick sketch... turns out I can somewhat draw today. I'm not being egotistical, it's really true sometimes I can't draw to save my life

http://img107.imageshack.us/img107/2408/kjtg6.jpg


I like the look of that, just needs some length to it i think...looks like a micro car or something..

VipFREAK
05-02-2007, 12:20 AM
Yeah... I have yet to figure out the length thing... because I usually cut off the front of the car. I can already tell what's wrong with it. Thanks

rob_h
05-02-2007, 05:54 AM
haha I love how this kid tells us to draw the car from the side, and then tells us that what we draw looks wrong... well how are we supposed to know what you see in your head huh??

lol i know andy in real life i like to take the mick out of his work

rob_h
05-02-2007, 06:21 AM
thanks chopperkidd i like the shape and im starting to think it would be good in convertable now.

vipFREAK i really like yours what you've drawn is exactly like how i wanted it to look. i was actually going for that kindof squashed look and the engine is in the centre so the bonnet needn't be long. i think the only way to improve your drawing would be to go into more detail., maybe try a different angle.

im going to give the side a try myself and maybe a 3/4 but keep posting. i won't post mine for a while yet.

chopperkidd44
05-02-2007, 08:34 AM
Sweet. Can i get a copy of the final drawing PM'd to me when ur done? I'd like to show friends what i contributed to. Thanks for the comment.

vipFREAK, one thing i learned about wheelbases of supercar, is that if i have a 1in wheel, i have a wheelbase of around 4-4.5in. That helps the look a lot. Good job though

andy2200a
05-02-2007, 09:38 AM
lol i know andy in real life i like to take the mick out of his work


except for 1 fact. ppl r on my side when it comes to dissin ur work coz u got a massive ego! lol

rob_h
05-02-2007, 01:32 PM
no there not andy because you don't type in there language lol.



right, ive done a side drawing of the car, i decided i'd go convertable as in andy and chopperkids drawings.

as i said at the start i feel i have messed it up. its lost its bulkiness and futuristic design and just looks too much like a ferrari, i much more prefer vipFREAKs drawing to my own:



http://www.photoshopchop.com/forum/upload/imagehosting/899846436827e7731.bmp

chopperkidd44
05-02-2007, 04:26 PM
What about mine to urs? Uhave better wheels and shading and stuff...but overall shape?

WildmanProductions
05-02-2007, 04:34 PM
I must be losing it, I can't read this...

cUn oInZ Jo dIz Ez hUwS err bOdz toKs on Da inTerNets

suzq044
05-02-2007, 05:24 PM
... please dont do that. lol [the internebonics]

rob_h
05-03-2007, 02:46 PM
chopperkid id say probably the whole shape would be something you contributed to i wouldn't really say the body kit but the main kindof flowing shape ..

i think you should practice your rims because i looked at that other picture on your pictures, of a focus or something, and it wasn't bad minus the rims. draw your centre first and then the first spoke, and then keep drawing lines for the other spokes and rubbing them out until you've got them all looking equally spaced. -and don't use a ruler.

chopperkidd44
05-03-2007, 04:22 PM
K i wasnt focusing on the wheels. i just needed something to make the car look more like a car u know wat im sayin?

OmicroN
05-03-2007, 04:47 PM
How about a Manga version? :p

http://img130.imageshack.us/img130/2387/customcarxo7.gif

chopperkidd44
05-03-2007, 07:20 PM
OMG! I'll try...emphasis on "try"

rob_h
05-04-2007, 11:38 AM
ye i get ya chopperkid, ive never tried manga but it looks great makes me think its a real car good idea pal.

post your side and front soonest ta

rob_h
05-04-2007, 05:15 PM
right ive tried that manga thing, this is my first time doing it so please be nice, tell me what you think:




http://www.photoshopchop.com/forum/upload/imagehosting/8998463ba224d380e.bmp

chopperkidd44
05-04-2007, 06:02 PM
It looks good. better than wat i couldve done

rob_h
05-05-2007, 04:17 AM
ta, but still have a try mate

chopperkidd44
05-05-2007, 11:06 AM
If i have time, yes. I'm having a party tonight :D

andy2200a
05-05-2007, 04:40 PM
how old ae you chopperkid me n rob wer tryna guess ur age in comparison to me. are you older or younger than 16 ?

chopperkidd44
05-05-2007, 04:50 PM
17. I turn 18 on August 9th of this year

rob_h
05-06-2007, 06:33 AM
how old ae you chopperkid me n rob wer tryna guess ur age in comparison to me. are you older or younger than 16 ?
:eek: how completely untrue

andy2200a
05-06-2007, 10:18 AM
Bollocks rob we were discussin how old e wer on the way 2 skool. i guess that means i win u sed he would b younger than me. happy b'day in August pal ;)

rob_h
05-06-2007, 11:04 AM
Bollocks rob we were discussin how old e wer on the way 2 skool. i guess that means i win u sed he would b younger than me. happy b'day in August pal ;)
wodeva u say :confused:

chopperkidd44
05-06-2007, 01:45 PM
K....thanks

PSDavinci
05-09-2007, 10:28 AM
This thread really got off topic.
Hey Rob, I got inspired by your design and wanted to give my interpretation of it.
Unlike the other submissions, I kept it a hardtop (well actually an all glass top) coupe.
I invisioned it a bit more rounded but tried to incorporate most of your design cues.
BTW, did you give it a name?

Here ya go...
(updated version)
http://350zos.com/images/Rob_H_Concept.JPG

VipFREAK
05-09-2007, 12:08 PM
I like it dood but uh... ya need a little fender yo?

PSDavinci
05-09-2007, 12:56 PM
^ haha, yeah I guess your referencing that paper thin front wheel arch.
I agree, I'll thicken that up a bit. (see updated version ^)

chopperkidd44
05-09-2007, 02:08 PM
Yeah. other than that i kinda like it. im thinkin about putting the entire thing into my own interpretation as well

andy2200a
05-10-2007, 05:56 AM
This thread really got off topic.
Hey Rob, I got inspired buy your design and wanted to give my interpretation of it.
Unlike the other submissions, I kept it a hardtop (well actually an all glass top) coupe.
I invisioned it a bit more rounded but tried to incorporate most of your design cues.
BTW, did you give it a name?

Here ya go...
(updated version)
http://350zos.com/images/Rob_H_Concept.JPG


tht is sweet m8

rob_h
05-10-2007, 06:15 AM
davinci thats great. i really like your alloys. chopperkidd, can't wait.

im going to do one of those 3/4 views or whatever they're called, but i think im going to change it, mainly the shape, to try and create a more sleek futuristic design.

il post soon maybe tomorrow.

PSDavinci
05-10-2007, 12:21 PM
Thanks man.
Im working on a render right now and may attempt to do this one next.
BTW, what happened to your original sketches?

rob_h
05-10-2007, 02:52 PM
small problem with hosting its sorted now, they should be there again.

working on my next sketch now for a few mins, won't be able to do any tomorow so should be hosted on saturday.

rob_h
05-10-2007, 04:18 PM
nvm ive finished it now, i also tried the flowing glass window/roof idea and that works quite well, but otherwise i don't like it it never looks like the picture i have in my head and i really hate the front.

oh and no i hadn't thought of a name.. tiesto. that will do.

http://www.photoshopchop.com/forum/upload/imagehosting/899846437d7f0b842.bmp