Navigation:   Home  >>  Forums

Go Back   Photoshopchop.com > PHOTO CHOPS > 3D RENDERING

Notices

3D RENDERING Been doing some 3D work and want to show it off? Put it here.

Reply
 
Thread Tools Display Modes
Old 02-21-2007, 12:49 AM   #1
CaptivaBlueTeg
PSC NOOB
 
Join Date: Nov 2005
Location: Rhode Island
Posts: 6
CaptivaBlueTeg is on a distinguished road
Default My 3d Vtec Engine, rims and such

All this has been self taught and done in 3ds max 5. I'm thinking on finishing of my schooling by doing this kinda stuff. I was Mechanical Engineering because I wanted to work with solidworks but it's too picky and I hate / suck at calculus.

Heres my work so far.

This engine was intended for a game so it's not completely detailed to the max like I know I can but whenever I have more time i'll start the more realistic stuff.





Turbo Setup





Mugen Style Cover I made



SR20DET Cover



A car that I designed after hearing about the Areil Atom





Vtec engine in that car, new texture on the valve cover




Nintendo Wii, Not completed but I measured everything so it's close to perfect scale.





Me messing around with a few parts that I made to promote my brothers business, needs more work but it was just to have fun with






98% of this stuff is completely made by me from scratch. But the other 2 percent was modified which was basically just the engine block and cylinder head which looked like two boxes. I also have a ton more rims but I haven't rendered them.
__________________

Base by:cm108kph Everything else by me :CaptivaBlueTeg
Rims- Axis NE-0
Muffler- Racitve N-1
CaptivaBlueTeg is offline   Reply With Quote
Old 02-21-2007, 02:54 AM   #2
erric1234
PSC "I HAVE NO LIFE" MEMBER
 
erric1234's Avatar
 
Join Date: Apr 2006
Location: san antonio
Posts: 556
erric1234 is on a distinguished road
Send a message via AIM to erric1234 Send a message via Yahoo to erric1234
Default

damn that is badass
__________________
erric1234 is offline   Reply With Quote
Old 02-21-2007, 05:11 AM   #3
BL-Z
PSC "I HAVE NO LIFE" MEMBER
 
BL-Z's Avatar
 
Join Date: Jan 2006
Posts: 620
BL-Z is on a distinguished road

Awards Showcase
Forum Troll 
Total Awards: 1

Default

true enough about solidworks, you have to be good at working on calculus and other things, 3d max 5 is a great preogram to use when not good at math but the outcome isnt as good
__________________
''regardless of what you think of BL-Z (AKA 6blizzy6), he has generated more discussion and opinion than any other person/ chop/subject in the past 6 months! good or ill?''
Probably One Of The Best Moments Of PSC History?
BL-Z is offline   Reply With Quote
Old 02-21-2007, 01:13 PM   #4
CaptivaBlueTeg
PSC NOOB
 
Join Date: Nov 2005
Location: Rhode Island
Posts: 6
CaptivaBlueTeg is on a distinguished road
Default

Thanks for the feedback so far. But yea I do like solidworks too but i'm more into designing things. I'm learning how to do cars also and I'm hoping to design my own concept cars once I actually know what i'm doing.
__________________

Base by:cm108kph Everything else by me :CaptivaBlueTeg
Rims- Axis NE-0
Muffler- Racitve N-1
CaptivaBlueTeg is offline   Reply With Quote
Old 02-21-2007, 07:42 PM   #5
Moncef
VR > VQ
 
Join Date: Jul 2006
Location: undisclosed location
Posts: 1,963
Moncef is on a distinguished road
Default

dude that's amazing bro..nice job! your turbo setup looks like what i draw of my motor, turbo bolted on and everything in math class..haha...your stuff's amazing, honda and nissan, you read my mind
__________________

>DeviantArt<
Carty is NOT my idol, I am merely a victim of his power as an admin...
Moncef is offline   Reply With Quote
Old 02-21-2007, 09:15 PM   #6
WildmanProductions
I Love Mike
 
WildmanProductions's Avatar
 
Join Date: Jun 2006
Location: Atlanta
Posts: 1,887
WildmanProductions is an unknown quantity at this point
Send a message via AIM to WildmanProductions
Default

meh would have been beter if it was a VORTEC

Thats some badass work you do there man :thumbup:
__________________
WildmanProductions is offline   Reply With Quote
Old 02-22-2007, 12:32 AM   #7
CaptivaBlueTeg
PSC NOOB
 
Join Date: Nov 2005
Location: Rhode Island
Posts: 6
CaptivaBlueTeg is on a distinguished road
Default

Thanks everyone it means a lot.

I guess i'll debut the new project that I started today, my first actual car! I have an exam tommarow and probably shouldn't be doing this but i've been studying and writing papers all week so i figured I would take a break and do this. I had to model it my own way since I didn't like how the tutorials teach.





The carbon fibre came out pretty bad but I need to play around with the unwrapping to get it how I want




This is my Favorite picture, don't know why just looks cool to me.

__________________

Base by:cm108kph Everything else by me :CaptivaBlueTeg
Rims- Axis NE-0
Muffler- Racitve N-1
CaptivaBlueTeg is offline   Reply With Quote
Old 02-22-2007, 07:31 PM   #8
white_lancer
PSC SENIOR MEMBER
 
white_lancer's Avatar
 
Join Date: Jun 2005
Posts: 353
white_lancer is on a distinguished road
Default

looking reall good man. which method did u use to model the car? the one i use (also the only one i know lol) is using a plane. but i always like to learn methods
__________________
white_lancer is offline   Reply With Quote
Old 02-22-2007, 11:14 PM   #9
CaptivaBlueTeg
PSC NOOB
 
Join Date: Nov 2005
Location: Rhode Island
Posts: 6
CaptivaBlueTeg is on a distinguished road
Default

Here's an update






Still need to separate the door and trunk. I have to play around with detatching the door since I can't seem to get it to come out looking right. It also needs some little fixes so it's not as bumpy in some areas. I also added my own lip kit that gives it a suttle aggressive look.

Quote:
looking reall good man. which method did u use to model the car? the one i use (also the only one i know lol) is using a plane. but i always like to learn methods
I did it kind of like people do when they do splines where they trace out the lines of the car. But I did it using planes and just extended and shifted planes in and target welded. It worked out better than doing it with just planes for me, the curves of the cars never seemed to come out right to me. It's been a trial and error thing for me so far.
__________________

Base by:cm108kph Everything else by me :CaptivaBlueTeg
Rims- Axis NE-0
Muffler- Racitve N-1
CaptivaBlueTeg is offline   Reply With Quote
Old 03-24-2007, 07:02 AM   #10
IntegraDC2typeR
PSC SENIOR MEMBER
 
IntegraDC2typeR's Avatar
 
Join Date: Jun 2006
Location: Australia
Posts: 336
IntegraDC2typeR is on a distinguished road
Default

Pretty awesome, I wish I could do this stuff. One thing with the S2K the front rim, the dish should be a little less than the back, my opinion, so don't change it if you don't want to. Keep it up.
IntegraDC2typeR is offline   Reply With Quote
Old 03-24-2007, 08:27 PM   #11
JXDesigns
PSC PRO MEMBER
 
JXDesigns's Avatar
 
Join Date: Aug 2005
Location: Kingston, Ontario
Posts: 219
JXDesigns is on a distinguished road
Send a message via AIM to JXDesigns Send a message via MSN to JXDesigns
Default

im loving your work, keep it up, i wish i could get back into 3d work, but its just not graphical enough for me.
__________________
JXDesigns is offline   Reply With Quote
Old 05-31-2007, 07:36 PM   #12
Kyalistas
PSC PRO MEMBER
 
Kyalistas's Avatar
 
Join Date: Apr 2007
Posts: 214
Kyalistas is on a distinguished road
Default

You are quite amazing dude. I love the S2000. Though I agree IMO I think the front rim shouldn't have as deep of a lip.
Kyalistas is offline   Reply With Quote
Old 10-03-2012, 08:48 AM   #13
chenta
PSC NOOB
 
Join Date: Oct 2012
Posts: 1
chenta is on a distinguished road
Default

great working
chenta is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Intel Core 2 Duo 6400 2.13GHz 2M 1066MHz Processor SL9T9 #004
$4.99
Intel Core 2 Duo 6400 2.13GHz 2M 1066MHz Processor SL9T9 #004 pictureIntel SL9KA 3.0Ghz Intel Pentium D 925 Dual Core CPU Processor #003
$5.99
Intel SL9KA 3.0Ghz Intel Pentium D 925 Dual Core CPU Processor #003 pictureIntel Core 2 Duo E7300 2.66 GHz 3MB 1066MHz SLAPB LGA775 CPU Processor #006
$4.99
Intel Core 2 Duo E7300 2.66 GHz 3MB 1066MHz SLAPB LGA775 CPU Processor #006 pictureIntel Pentium 4 520 2.8 GHz 1M 800 CPU Processor socket 775 SL7PR #005
$4.99
Intel Pentium 4 520 2.8 GHz 1M 800 CPU Processor socket 775 SL7PR #005 pictureIntel Core i7-5930K 3.5GHz Processor
$250.0
Intel Core i7-5930K 3.5GHz Processor picture



All times are GMT -4. The time now is 03:09 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
All rights reserved 2002-2008 Photoshopchop.com