Navigation:   Home  >>  Forums

Go Back   Photoshopchop.com > HOW TO'S > REQUESTS

Notices

REQUESTS Request anything having to do with photoshop here.

Reply
 
Thread Tools Display Modes
Old 08-26-2004, 06:46 PM   #1
joemomma95
Me love you long time
 
joemomma95's Avatar
 
Join Date: Jul 2003
Location: AZ
Posts: 3,195
joemomma95 is on a distinguished road

Awards Showcase
Net Nazi 
Total Awards: 1

Send a message via AIM to joemomma95
Default

OK, I just went through all pinned topics in the Tutorial Section and unpinned all threads with no pics or meaningless pinned threads. Here's some that I unpinned that we could use..

-roof chop(chop top)
-chameleon paint
-burnout
-metallic paint
-widebody
-anything to do with GIF's or imageready


So, if you have some time to burn or bored off your a$$ then make a decent Tutorial and if it's good we'll pin it. And don't be afraid to make one that isn't listed or isn't already in the Tutorial Section.

BUT, PLEASE NO MORE CARBON FIBER TUTORIALS...we have like 300 already and don't really need anymore. In fact, sooner or later I think we'll do a poll on all the repeated Tutorials and see which one is the favorite and unpin all the others and leave links to them in the favorite(pinned)tutorial...but that'll be down the road a little ways..
__________________

[/CENTER]

Carty was here
joemomma95 is offline   Reply With Quote
Old 08-27-2004, 01:36 AM   #2
dreamv2.0
3000 AND CLIMBING
 
dreamv2.0's Avatar
 
Join Date: Aug 2003
Location: Indianapolis, IN
Posts: 3,213
dreamv2.0 is an unknown quantity at this point
Send a message via AIM to dreamv2.0 Send a message via MSN to dreamv2.0
Default

ok i figure ill post a tut here and you post it in the apropriate place to clean this all up i say we start all over and do it in this format clean and simple all in one 1024x768 picture

dreamv2.0 is offline   Reply With Quote
Old 08-29-2004, 03:56 AM   #3
dreamv2.0
3000 AND CLIMBING
 
dreamv2.0's Avatar
 
Join Date: Aug 2003
Location: Indianapolis, IN
Posts: 3,213
dreamv2.0 is an unknown quantity at this point
Send a message via AIM to dreamv2.0 Send a message via MSN to dreamv2.0
Default

well damnit i guess you dont like the tut good cuz its the last one im making :P
dreamv2.0 is offline   Reply With Quote
Old 08-29-2004, 05:35 PM   #4
joemomma95
Me love you long time
 
joemomma95's Avatar
 
Join Date: Jul 2003
Location: AZ
Posts: 3,195
joemomma95 is on a distinguished road

Awards Showcase
Net Nazi 
Total Awards: 1

Send a message via AIM to joemomma95
Default

Has nothing to do with the Tutorial, I've been away for the weekend, I'll get it in the Tutorial section asap...I like the format BTW ...

Oh yeah, and it's gonna hafta be posted under my name unless you wanna repost it over there and then I'll pin it...
__________________

[/CENTER]

Carty was here
joemomma95 is offline   Reply With Quote
Old 08-29-2004, 06:57 PM   #5
dreamv2.0
3000 AND CLIMBING
 
dreamv2.0's Avatar
 
Join Date: Aug 2003
Location: Indianapolis, IN
Posts: 3,213
dreamv2.0 is an unknown quantity at this point
Send a message via AIM to dreamv2.0 Send a message via MSN to dreamv2.0
Default

its cool it can be under your name i think they all should be that way we know which ones are official
dreamv2.0 is offline   Reply With Quote
Old 09-10-2004, 01:30 AM   #6
joemomma95
Me love you long time
 
joemomma95's Avatar
 
Join Date: Jul 2003
Location: AZ
Posts: 3,195
joemomma95 is on a distinguished road

Awards Showcase
Net Nazi 
Total Awards: 1

Send a message via AIM to joemomma95
Default

Clean up has begun. Please vote in the pinned threads in this section(the ones sub-titled Cleaning House).

Thanks, hope this goes well...then maybe we can get rid of a page or two of pinned Tutorials.

EDIT: I almost forgot, what do you guys think of doing a poll on the different paint Tutorials? The reason I ask is because there is ALOT of painting Tutorials and if we can narrow all of them down to one(with links to the others) then that'd be a good thing(I think :unsure: ). But on the other hand, most of them have slight differences in them and I'm not sure they should all be bunched up into one thread with links....I'm wide open for comments on this idea .
__________________

[/CENTER]

Carty was here
joemomma95 is offline   Reply With Quote
Old 09-10-2004, 11:15 PM   #7
hawk_196
PSC 1000 POSTS MEMBER
 
hawk_196's Avatar
 
Join Date: Jul 2003
Location: Atlanta
Posts: 1,842
hawk_196 is an unknown quantity at this point
Default

Yeah I was thinking the ultimate way to clean up the tut section would be to have only posts with links to the tuts pinned. Like a Carbon Fiber Tut Links thread pinned along with other stuff (chrome, weather effects, color changes, etc....).
__________________

This is a signature virus. Copy me into your signature and help me spread.
hawk_196 is offline   Reply With Quote
Old 09-11-2004, 12:05 AM   #8
MRWILDE
 
MRWILDE's Avatar
 
Join Date: Jan 1970
Location: Canada - Smack in the middle.
Posts: 2,174
MRWILDE is an unknown quantity at this point
Default

If anyone wants to get any of these out to the tutorial section of the site let me know and ill fire it up.
__________________
MRWILDE is offline   Reply With Quote
Old 09-16-2004, 01:38 AM   #9
joemomma95
Me love you long time
 
joemomma95's Avatar
 
Join Date: Jul 2003
Location: AZ
Posts: 3,195
joemomma95 is on a distinguished road

Awards Showcase
Net Nazi 
Total Awards: 1

Send a message via AIM to joemomma95
Default

OK, not to sure what you mean boss but I think you mean putting a Tutorial from the Tutorial Section of the forum on the front page Tutorial link? If so, I just consolidated all the ones I did polls for...maybe you wanna link the best out of those??

Anyways, thanks everyone who voted on the Tutorial clean-up polls. I have consolidated some of them, there's still 2 that need more votes..can't make a choice in the case of a tie, need members to choose...thanks again...

EDIT: BTW, I got it down to 3 1/2 pages of pinned topics so far....not bad considering there was 5 pages huh ??
__________________

[/CENTER]

Carty was here
joemomma95 is offline   Reply With Quote
Old 09-24-2004, 06:43 PM   #10
hawk_196
PSC 1000 POSTS MEMBER
 
hawk_196's Avatar
 
Join Date: Jul 2003
Location: Atlanta
Posts: 1,842
hawk_196 is an unknown quantity at this point
Default

I know you said that you didn't want anymore CF tuts but I use the displacement map and I just wanna show people how to do it.
BTW I stlole nogod's idea of having a single pic for the tut.

If you're gonna post this, you can cut here
BTW, then end result sucks because I rushed it.

------------------

Displaced Carbon Fiber

This tutorial corresponds with Omicron's tutorial so follow his tutorial unless otherwise noted here.

NOTE: I don't reccomend using this strategy for cars with a lot of reflections, or cars that dont need it. I only reccomend to do this to objects with a lot of angles to them (trunks, interiors, big scoops).

__________________

This is a signature virus. Copy me into your signature and help me spread.
hawk_196 is offline   Reply With Quote
Old 09-25-2004, 02:15 AM   #11
joemomma95
Me love you long time
 
joemomma95's Avatar
 
Join Date: Jul 2003
Location: AZ
Posts: 3,195
joemomma95 is on a distinguished road

Awards Showcase
Net Nazi 
Total Awards: 1

Send a message via AIM to joemomma95
Default

Thanks hawk, but as I said before, we don't really need any more...your welcome to post this is the Tutorial Section but and maybe if you get enough positive response on it we'll pin it in with the 20 billion other CF tutorials ....


BTW, an update on the house cleaning(not that anyone cares) but I've narrowed the pinned topics down to about 2 1/4 pages. Thanks for everyone who helped and voted, I know it didn't seem that important to some but the ones who voted helped me out alot, thanks. Now, what else can a waste time and space on ?

BTW, we're always open to new Tutorials, but I think from now on we're not gonna pin every tutorial that pops up. Make a good one and get alot of positive response on it and it'll be pinned. Thanks again PSC members!
__________________

[/CENTER]

Carty was here
joemomma95 is offline   Reply With Quote
Old 10-17-2004, 12:12 PM   #12
hawk_196
PSC 1000 POSTS MEMBER
 
hawk_196's Avatar
 
Join Date: Jul 2003
Location: Atlanta
Posts: 1,842
hawk_196 is an unknown quantity at this point
Default

Hey umm I think I figured out a way to make a curved line of LED's... should I do a tut on it?
__________________

This is a signature virus. Copy me into your signature and help me spread.
hawk_196 is offline   Reply With Quote
Old 10-17-2004, 01:12 PM   #13
joemomma95
Me love you long time
 
joemomma95's Avatar
 
Join Date: Jul 2003
Location: AZ
Posts: 3,195
joemomma95 is on a distinguished road

Awards Showcase
Net Nazi 
Total Awards: 1

Send a message via AIM to joemomma95
Default

If you think that it's something that'll be helpful to other members then go for it, if you get enough good critisism on your tutorial thread then it'll could possibly be a pinned tutorial...
__________________

[/CENTER]

Carty was here
joemomma95 is offline   Reply With Quote
Old 11-02-2004, 06:26 PM   #14
LowerdIS300
PSC MEMBER
 
Join Date: Jul 2004
Location: South Carolina
Posts: 146
LowerdIS300 is an unknown quantity at this point
Default

Hawk I woul love to see what your talkin' about... It might help me or other choppers, So I say go ahead!

Hope to see it pinned
__________________
Never argue with an Idiot - They drag you down to their level, then beat you with experience.


^My Favorite Car in the world!! *drools*

<center>
LowerdIS300 is offline   Reply With Quote
Old 02-11-2005, 12:14 AM   #15
hawk_196
PSC 1000 POSTS MEMBER
 
hawk_196's Avatar
 
Join Date: Jul 2003
Location: Atlanta
Posts: 1,842
hawk_196 is an unknown quantity at this point
Default

Quote:
Originally posted by joemomma95@Aug 26 2004, 05:46 PM
OK, I just went through all pinned topics in the Tutorial Section and unpinned all threads with no pics or meaningless pinned threads. Here&#39;s some that I unpinned that we could use..

-roof chop(chop top)
-chameleon paint
-burnout
-metallic paint
-widebody
-anything to do with GIF&#39;s or imageready


So, if you have some time to burn or bored off your a&#036;&#036; then make a decent Tutorial and if it&#39;s good we&#39;ll pin it. And don&#39;t be afraid to make one that isn&#39;t listed or isn&#39;t already in the Tutorial Section.

BUT, PLEASE NO MORE CARBON FIBER TUTORIALS...we have like 300 already and don&#39;t really need anymore. In fact, sooner or later I think we&#39;ll do a poll on all the repeated Tutorials and see which one is the favorite and unpin all the others and leave links to them in the favorite(pinned)tutorial...but that&#39;ll be down the road a little ways..
You can tick the animated .gif&#39;s one off that list...

http://photoshopchop.com/forums/index.php?...view=getnewpost
__________________

This is a signature virus. Copy me into your signature and help me spread.
hawk_196 is offline   Reply With Quote
Old 03-12-2006, 09:17 PM   #16
KEV
PSC "I HAVE NO LIFE" MEMBER
 
KEV's Avatar
 
Join Date: Feb 2006
Location: uk ... ... blackpool
Posts: 979
KEV is on a distinguished road
Send a message via MSN to KEV
Default

ive dun everything in the eyes tut n it still doesnt work for me
KEV is offline   Reply With Quote
Old 03-04-2008, 10:39 AM   #17
Anver
Banned
 
Anver's Avatar
 
Join Date: Feb 2008
Location: South Africa
Posts: 40
Anver is on a distinguished road
Send a message via Yahoo to Anver
Default

hey guys ... im chopping a WRX STI... I added nyc rims... dark windows... I also added a sweet front bumper and from the side mirrors I put the new GTR Skyline back... And trust me it all looks great... I even added nyc skirts and lowered it... But iv got one problem... and iv looked through the forums and tryed the tutorails but i cant get.....The problem is that the original car colour , the skyline back colour and the front bumper colour dont match... I tried desaturating it but it still a different colour... I need Help
Anver is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

AMD Athlon 64 4000+ 2.4GHz ADA4000DKA5CF (ADA4000CFBOX) X64 CPU
$19.99
AMD Athlon 64 4000+ 2.4GHz ADA4000DKA5CF (ADA4000CFBOX) X64 CPU pictureIntel Skylake i5-6500 3.2GHz Quad-Core (BX80662I56500) Processor
$185.0
Intel Skylake i5-6500 3.2GHz Quad-Core (BX80662I56500) Processor pictureCore 2 Duo E6700 2.66GHz - Processor - Computer Components
$218.69
Core 2 Duo E6700 2.66GHz - Processor - Computer Components picturePC Cpu Cooler Cooling Fan Heatsink 775 1155 1156 Intel Core 2 Duo Pentium 4
$11.11
PC Cpu Cooler Cooling Fan Heatsink 775 1155 1156 Intel Core 2 Duo Pentium 4 pictureNEW AMD RYZEN 7 2700X 8-Core 3.7 GHz Socket AM4 105W YD270XBGAFBOX Processor
$128.9
NEW AMD RYZEN 7 2700X 8-Core 3.7 GHz Socket AM4 105W YD270XBGAFBOX   Processor picture



All times are GMT -4. The time now is 07:42 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
All rights reserved 2002-2008 Photoshopchop.com