|
CHOPS IN PROGRESS For all those unfinished chops. Try to keep things clean in the auto chop section and post all those works in progress right here. |
02-28-2009, 04:19 AM
|
#2
|
PSC "I HAVE NO LIFE" MEMBER
Join Date: Dec 2007
Location: Wollongong ,Australia
Posts: 816
|
Maybe add some scratches bro, that thing is LOOOOWWWW! Just kidding, Imo, the rear bar is too square and boxy for this car. Are you going for toon style or something realistic? Reason I ask is 'cause the rims look great for toon style, but not so realistic.
Overall its looking much meaner, keep going.
__________________
|
|
|
02-28-2009, 06:40 AM
|
#3
|
I Love Mike
Join Date: Jan 2009
Location: Manly , Australia
Posts: 924
|
yeah ive seen some racecars where the wheel arches follow the around the wheels until about 1-2 inches off the ground so im goin for that sorta idea
yer im looking at it now and the rear bar sticks out a bit too far and ill round it up a bit to suit the rest of the car
im tryn to go for a realistic style , with the wheels i just made them like a shadow colour and deep dished them , what do u rekon i could do to make them more realistic
now that i realy look at it , it probly looks realy toony atm cos there isnt any highlights or shadows on the kit , + i did a real quick job on the shadows(that doesnt help!)
|
|
|
02-28-2009, 08:18 AM
|
#4
|
PSC "I HAVE NO LIFE" MEMBER
Join Date: Dec 2007
Location: Wollongong ,Australia
Posts: 816
|
I think you need to add some highlites and shadows to the wheels, I think thats what they're needing too.
__________________
|
|
|
02-28-2009, 12:55 PM
|
#5
|
PSC 2000 POST MEMBER
Join Date: Sep 2006
Location: Dallas, Texas
Posts: 2,333
|
Yeah BT, this is nice but like you said it needs some shading especially on the lower edges of the kit.
Also look at the original wheels and place some highlites on the wheels accordingly.
Doesnt lack much bro.
__________________
|
|
|
02-28-2009, 05:28 PM
|
#6
|
I Love Mike
Join Date: Jan 2009
Location: Manly , Australia
Posts: 924
|
why is the red on my update darker than my first edit?
|
|
|
02-28-2009, 05:59 PM
|
#7
|
PSC 2000 POST MEMBER
Join Date: Sep 2006
Location: Dallas, Texas
Posts: 2,333
|
Yeah thats better BT.
I think the outer bead on the rim is right but its too bright, may want to lower the opacity a bit.
You need some reflection on the bottom lip of the rims also.
This would look really cool with a nice canister exhaust sticking out from under that rear diffuser spewing some flame!
I dont see any difference in the red BTW.
If you feel daring, try cutting about a quarter inch of the right rear edge of the car from top to bottom and placing it on a new layer above the car. Then apply a motion blur adjusted in the direction the car is moving.
Adjust the opacity so its barely visable.
See what you think.
__________________
|
|
|
03-01-2009, 06:58 AM
|
#8
|
I Love Mike
Join Date: Jan 2009
Location: Manly , Australia
Posts: 924
|
thanks Dav & Gimp
i fixed the wheel bead brightness and added to the bottom
now i put 2 cannons on , i was goin to put a little bit of red reflec on them but the diffuser kinda hides them , unless you think i should put a litttle on
i tried flames but i couldnt realy come up with anything decent
and i also found out why one car looked like it had a different shade of red to the other , because i have a 22" screen , and the angle i was looking at it , it just made it look like a different shade so yer haha no worries
|
|
|
03-03-2009, 03:26 PM
|
#9
|
I Love Mike
Join Date: Jan 2009
Location: Manly , Australia
Posts: 924
|
anyone got any other suggestions?
ill have an update thisafternoon
__________________
|
|
|
03-03-2009, 11:25 PM
|
#10
|
PSC 1000 POSTS MEMBER
Join Date: Dec 2008
Location: Darlington, England
Posts: 1,292
|
I would say blend the back bumper and sideskirt abit more and some new back lights
__________________
|
|
|
03-04-2009, 02:00 AM
|
#11
|
I Love Mike
Join Date: Jan 2009
Location: Manly , Australia
Posts: 924
|
yer i just did a heap of work to it yesterday got everything blended few other additions n bits n peices , then dad asked me to help him with something then mum watched tv on our pc then turned the pc off wen she went to bed , and then guess what , poof there goes about 3hrs of work , not happy jan!
__________________
|
|
|
03-07-2009, 07:53 AM
|
#13
|
I Love Mike
Join Date: Jan 2009
Location: Manly , Australia
Posts: 924
|
new update! , can anyone give me tips on how to blend the new bumper to the old one , i just cant seem to get it right , aarrrrgggghh , help me i neeeeeed to finnish it
__________________
|
|
|
03-07-2009, 09:50 AM
|
#14
|
PSC 1000 POSTS MEMBER
Join Date: Dec 2008
Location: Darlington, England
Posts: 1,292
|
Dude that sik man, Very nicely done now
__________________
|
|
|
03-26-2009, 03:28 PM
|
#15
|
PSC MEMBER
Join Date: Mar 2009
Posts: 50
|
That looks phat!!!!
__________________
|
|
|
|