Navigation:   Home  >>  Forums

Go Back   Photoshopchop.com > PHOTO CHOPS > CHOPS IN PROGRESS
Register FAQ Community Calendar Today's Posts Search

Notices

CHOPS IN PROGRESS For all those unfinished chops. Try to keep things clean in the auto chop section and post all those works in progress right here.

Reply
 
Thread Tools Display Modes
Old 06-10-2004, 04:32 PM   #1
blazinking
PSC 1000 POSTS MEMBER
 
Join Date: Apr 2004
Location: NJ, USA
Posts: 1,098
blazinking is an unknown quantity at this point
Default

Check the auto chops section for the final version under "Terra Pickup"
and heres the projects progress ....
org.



what i got so far

The rims ...


heres another update ....
I shaved the emblem, and door handels and gave it a lower stance ( it's not smoothed out yet so it's a bit rough around some of the edges and I havent chosen any brakes on it yet either)


Heres an idea for the tribal paint job I started workin on ...



I added the bedcover and brighter grille I also cleaned up the paint on the rear rim


Brain just to show yeah it's got rubber around the wheels I brighten up the area. Again I didnt realy mess with that region that much or color it around there the tires were dark from the start, some pics just have it like that Not every pic gotta show rubber ....






Check the auto chops section for the final version under "Terra Pickup"



Last edited by blazinking at Jun 14 2004, 10:14 PM
__________________


StreetSpecKustoms
blazinking is offline   Reply With Quote
Old 06-10-2004, 04:38 PM   #2
Chopsta
PSC 1000 POSTS MEMBER
 
Join Date: Nov 2003
Posts: 1,554
Chopsta is an unknown quantity at this point
Default

uh is that suppost to be abstract or something? and making it a pimp mobile wit those rims? try raising it wit some monster tires.. jus my opinion
__________________
Chopsta is offline   Reply With Quote
Old 06-10-2004, 04:48 PM   #3
rcm
PSC PRO MEMBER
 
Join Date: May 2004
Posts: 242
rcm is an unknown quantity at this point
Default

Whats with thr bright spots? and GMC is backwards... and i think the back rim goes past the tire on the left...



Last edited by rcm at Jun 10 2004, 07:16 PM
__________________
rcm is offline   Reply With Quote
Old 06-10-2004, 04:56 PM   #4
dreamv2.0
3000 AND CLIMBING
 
dreamv2.0's Avatar
 
Join Date: Aug 2003
Location: Indianapolis, IN
Posts: 3,213
dreamv2.0 is an unknown quantity at this point
Send a message via AIM to dreamv2.0 Send a message via MSN to dreamv2.0
Default

i think the brightness is him showing you what hes done so far
dreamv2.0 is offline   Reply With Quote
Old 06-10-2004, 07:06 PM   #5
GaZ
PSC 1000 POSTS MEMBER
 
Join Date: Feb 2004
Location: Lincoln England
Posts: 1,449
GaZ is an unknown quantity at this point
Send a message via MSN to GaZ
Default

nice rims how about some brakes? just a thought lol i kno ya only just started but il take it u rembered
__________________
GaZ is offline   Reply With Quote
Old 06-10-2004, 08:26 PM   #6
blazinking
PSC 1000 POSTS MEMBER
 
Join Date: Apr 2004
Location: NJ, USA
Posts: 1,098
blazinking is an unknown quantity at this point
Default

the lighter spots are just construction areas that were brightened up so I get to c how the tire runs to line up the rims. the resolution on my comp is little dark so i cant always c everything ....
this is just a start and trust me it'll be sweet lookin by the time i get through with it.
yes the truck is fliped so the gmc emblem is fliped as well ... but i'm planin to switch the frnt clip totaly or atleast play with this one to updated it to somethin better lookin ... I'll updated a new pic on a daily bases maybe even more then that pendin how long it'll take to finish this ...

Check above for updates I'm gonna post the newest once below the older in the first post ...



Last edited by blazinking at Jun 10 2004, 10:48 PM
__________________


StreetSpecKustoms
blazinking is offline   Reply With Quote
Old 06-11-2004, 11:14 AM   #7
digitalh2o
PSC MEMBER
 
digitalh2o's Avatar
 
Join Date: May 2004
Posts: 74
digitalh2o is an unknown quantity at this point
Default

how would the front wheel turn <_<
__________________
digitalh2o is offline   Reply With Quote
Old 06-11-2004, 12:26 PM   #8
blazinking
PSC 1000 POSTS MEMBER
 
Join Date: Apr 2004
Location: NJ, USA
Posts: 1,098
blazinking is an unknown quantity at this point
Default

This isnt a car with a sport suspension that&#39;s been only lowered and cant be raised back up at a flip of a switch ... havent u ever seen a slammed mini or sedan ( LOWRIDER) layed out in a show and then c the same thing ridin around all jacked up to normal height ??? <_<





Last edited by blazinking at Jun 11 2004, 11:32 AM
__________________


StreetSpecKustoms
blazinking is offline   Reply With Quote
Old 06-11-2004, 02:30 PM   #9
Anthony Montelo
PSC "I HAVE NO LIFE" MEMBER
 
Join Date: Dec 2003
Location: In The Garage
Posts: 922
Anthony Montelo is an unknown quantity at this point
Send a message via AIM to Anthony Montelo Send a message via MSN to Anthony Montelo
Default

Quote:
Originally posted by digitalh2o@Jun 11 2004, 10:14 AM
how would the front wheel turn <_<
its a chop dumbshit, it doesnt have to be exactly real.

N e ways, nice so far, make sum brakes tho plz.
__________________
Anthony Montelo is offline   Reply With Quote
Old 06-11-2004, 02:44 PM   #10
humppapappa
PSC PRO MEMBER
 
Join Date: Mar 2004
Location: Finland
Posts: 224
humppapappa is an unknown quantity at this point
Send a message via MSN to humppapappa
Default

Otherwise very good but that green thingy above the front light is bothering me...
__________________

Finnish photoshop site
humppapappa is offline   Reply With Quote
Old 06-11-2004, 05:47 PM   #11
blazinking
PSC 1000 POSTS MEMBER
 
Join Date: Apr 2004
Location: NJ, USA
Posts: 1,098
blazinking is an unknown quantity at this point
Default

those green things are blinkers that I just painted to match little toward the paint but they are just temps ... I&#39;m planin to lose em or atleast clear corners.

I&#39;ll add rotors to the ride but that&#39;ll be one of the last things I do I still have alot of body work to do like the frnt headlights, grille, bed cover, maybe a billet mirror to match the rims.



Last edited by blazinking at Jun 11 2004, 04:51 PM
__________________


StreetSpecKustoms
blazinking is offline   Reply With Quote
Old 06-11-2004, 06:09 PM   #12
BrianF 88iS
PSC NOOB
 
Join Date: Jun 2004
Posts: 40
BrianF 88iS is an unknown quantity at this point
Default

Not to be too picky about this, but you got some of your paint colors are being a bit smudged onto the back wheel
With the wheels, it looks like that it is just sitting on the wheel and not any tire, also looks like it is going to stracht the hell out of the underside of your fender flares and not move.
__________________
BrianF 88iS is offline   Reply With Quote
Old 06-11-2004, 07:33 PM   #13
blazinking
PSC 1000 POSTS MEMBER
 
Join Date: Apr 2004
Location: NJ, USA
Posts: 1,098
blazinking is an unknown quantity at this point
Default

alright I c some of u still dont get this. most layed mini&#39;s can&#39;t move when layed out cause the tires stick into the whole engine bay and are inches from either the hood or the engine. I know The fender flares are a bit small but the way the truck is sittin it&#39;ll lay frame and be able to tuck those rims. thats one of the reasons I didnt lay the truck totaly.
I belive u it wont turn or be able to run like this w/o rubin rubber but the way it&#39;s sittin now it&#39;ll be able to lay frame but thats just for sittin for drivin just like most of the mini&#39;s that tuck big rims it&#39;ll have to lift up ....

.... check above for another update ....
__________________


StreetSpecKustoms
blazinking is offline   Reply With Quote
Old 06-11-2004, 07:58 PM   #14
Krazed Illuzionz
PSC SENIOR MEMBER
 
Join Date: Apr 2004
Posts: 361
Krazed Illuzionz is an unknown quantity at this point
Default

go lower hahahaha needs a massive b/d. and u guys need to do some research on bagged trucks. u never see a pic of a laid out truck or car with the wheels turned, DUH :P

only thing i see is that it needs some negitive camber in the front wheel to looked totally bagged



Last edited by Krazed Illuzionz at Jun 11 2004, 06:59 PM
__________________
Street Spec Kustoms Website
Krazed Illuzionz is offline   Reply With Quote
Old 06-11-2004, 08:22 PM   #15
blazinking
PSC 1000 POSTS MEMBER
 
Join Date: Apr 2004
Location: NJ, USA
Posts: 1,098
blazinking is an unknown quantity at this point
Default

heres a few pics of real mini&#39;s layed out









I know I gotta push my rims just a little bit back to show they go more into the engine



heres one layin frame with big rims. it&#39;s got alot of nagative camber but they tuck.
__________________


StreetSpecKustoms
blazinking is offline   Reply With Quote
Old 06-11-2004, 08:48 PM   #16
BrianF 88iS
PSC NOOB
 
Join Date: Jun 2004
Posts: 40
BrianF 88iS is an unknown quantity at this point
Default

Quote:
Originally posted by BrianF 88iS@Jun 11 2004, 03:09 PM
With the wheels, it looks like that it is just sitting on the wheel and not any tire.
I was just saying that it looks like you have no tire, I am not commenting on how low the truck is.
__________________
BrianF 88iS is offline   Reply With Quote
Old 06-11-2004, 11:09 PM   #17
blazinking
PSC 1000 POSTS MEMBER
 
Join Date: Apr 2004
Location: NJ, USA
Posts: 1,098
blazinking is an unknown quantity at this point
Default

I wasnt talkin to u in person just sayin in general sorry if it came out like that i didnt mean for it.
To answer u&#39;re q about the tires ... If u take a look at the first chop pic i uploaded, when i just placed the rims on it, i lightened up the area around the wheels to show the rubber. I actualy couldnt c it myself thats why i did it. the fact is that pic itself is darker around that region I never actualy touched it.
I took of the construction area off cause it made my paint look bad and I hated lookin at it like that but heres a lightened up shot of that pic showin that it&#39;s got rubber around those rims ......

...um actualy i cant upload right now cause the image hostin page just went down so I&#39;ll try to post it up tomorrow. basicly the tires are there similar lookin tot he first shot just little cleaned up.
__________________


StreetSpecKustoms
blazinking is offline   Reply With Quote
Old 06-12-2004, 11:34 PM   #18
utah
PSC MEMBER
 
Join Date: Jan 2004
Location: Brisbane, Australia
Posts: 100
utah is an unknown quantity at this point
Default

honestly im not the biggest fan of the tribal vinyl, i&#39;d prolly wouldn&#39;t have it and just do an awesome colour on the car, it looks pretty wicked though especially fully dubbed lowrider style, the rims are awesome for that car, maybe jsut too big but yeah its lookin pretty sweet.
__________________

...................................
Thanks to Dhol for the sig&#33; you rock man.
utah is offline   Reply With Quote
Old 06-13-2004, 11:46 AM   #19
blazinking
PSC 1000 POSTS MEMBER
 
Join Date: Apr 2004
Location: NJ, USA
Posts: 1,098
blazinking is an unknown quantity at this point
Default

This tribal paint work is not a vinyl sticker/decal but a tribal design for the bottom portion of the paint design that i started doin for this car. I personaly dont like decals on my rides. As for the rims yeah they are a bit big I should have put more nagative camber on am so they&#39;d tuck better uner the fender flares but the idea was that this bad boy was supose to be cruisin on 24&#39;s thats also another reason why it aight layin rockers.

Brian I posted a update just to show yeah the brightened area around the tire region.



Last edited by blazinking at Jun 13 2004, 10:49 AM
__________________


StreetSpecKustoms
blazinking is offline   Reply With Quote
Old 06-13-2004, 05:47 PM   #20
Krazed Illuzionz
PSC SENIOR MEMBER
 
Join Date: Apr 2004
Posts: 361
Krazed Illuzionz is an unknown quantity at this point
Default

Quote:
Originally posted by utah@Jun 12 2004, 10:34 PM
honestly im not the biggest fan of the tribal vinyl, i&#39;d prolly wouldn&#39;t have it and just do an awesome colour on the car,
vynal&#39;s for ur house not ur car.





Last edited by Krazed Illuzionz at Jun 13 2004, 04:48 PM
__________________
Street Spec Kustoms Website
Krazed Illuzionz is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


IBM System X 3250 M5 Single Xeon Quad Core E3-1220 v3 @3.1GHz,8GB RAM,Linux SUSE picture

IBM System X 3250 M5 Single Xeon Quad Core E3-1220 v3 @3.1GHz,8GB RAM,Linux SUSE

$199.87



Dell PowerEdge R730xd Server 2.60Ghz 32-Core 64GB 800GB SSD Debian Linux picture

Dell PowerEdge R730xd Server 2.60Ghz 32-Core 64GB 800GB SSD Debian Linux

$836.80



1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports picture

1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports

$149.00



32GB Web HTML HTTP Server, Great tool for eBay seller & kids to host web site picture

32GB Web HTML HTTP Server, Great tool for eBay seller & kids to host web site

$229.99



2 x HP ProLiant BL460c (447707-B21) Blade Servers No RAM No HDD picture

2 x HP ProLiant BL460c (447707-B21) Blade Servers No RAM No HDD

$30.00



Red Hat Enterprise Linux 5 Server - New and Sealed picture

Red Hat Enterprise Linux 5 Server - New and Sealed

$16.99



6x Powered By Linux Computer Sticker Decals Desktop Laptop Server Badge Decal picture

6x Powered By Linux Computer Sticker Decals Desktop Laptop Server Badge Decal

$2.99



IBM CS821 20-Core 2.827GHz 128Gb 1.92Tb SSD 1U Linux Server - 8005-12N Power 8 picture

IBM CS821 20-Core 2.827GHz 128Gb 1.92Tb SSD 1U Linux Server - 8005-12N Power 8

$449.96



1U Open Source Router Firewall X10SLH-N6-ST031 E3-1270 V3 6x 10GB Ethernet 16GB picture

1U Open Source Router Firewall X10SLH-N6-ST031 E3-1270 V3 6x 10GB Ethernet 16GB

$419.00



POGO Linux WEBWARE 1150 Rack-Mount Server Pentium 4 2.8GHz 512MB - No Drives picture

POGO Linux WEBWARE 1150 Rack-Mount Server Pentium 4 2.8GHz 512MB - No Drives

$179.99




All times are GMT -4. The time now is 11:19 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All rights reserved 2002-2008 Photoshopchop.com