Cisco WS-C3560G-48PS-S Catalyst 48-Port Layer 2+ Gigabit PoE Switch W/4xSFP port For Sale

Cisco WS-C3560G-48PS-S Catalyst 48-Port Layer 2+ Gigabit PoE Switch W/4xSFP port
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Buy Now

Cisco WS-C3560G-48PS-S Catalyst 48-Port Layer 2+ Gigabit PoE Switch W/4xSFP port:
$180.66

Cisco WS-C3560G-48PS-S Catalyst 48-Port Layer 2+ Gigabit PoE Switch W/ 4x SFP ports Description

The item is tested and fully functional. Does have some scratches on the body.

Package include: Switch, AC cable with UK plug, 2x rack mounts.

Performance

  • 32 Gbps forwarding bandwidth
  • Forwarding rate based on 64-byte packets:
  • 38.7 Mpps (Cisco Catalyst3560G-48PS)
  • 128 MB DRAM
  • 32 MB Flash memory
  • Configurable up to 12,000 MAC addresses
  • Configurable up to 11,000 unicast routes
  • Configurable up to 1000 IGMP groups and multicast routes
  • Configurable maximum transmission unit (MTU) of up to 9000 bytes, with a maximum Ethernet frame size of 9018 bytes (Jumbo frames), for bridging on Gigabit Ethernet ports, and up to 1546 bytes for bridging of Multiprotocol Label Switching (MPLS) tagged frames on 10/100 ports

Connectors and Cabling

  • 10BASE-T ports: RJ-45 connectors, two-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling
  • 10BASE-T PoE ports: RJ-45 connectors, two-pair Category 3, 4, or 5 UTP cabling power pins 1,2 (negative) and 3,6 (positive)
  • 100BASE-TX ports: RJ-45 connectors, two-pair Category 5 UTP cabling
  • 100BASE-TX PoE ports: RJ-45 connectors, two-pair Category 5 UTP cabling, power on pins 1,2 (negative) and 3,6 (positive)
  • 1000BASE-T ports: RJ-45 connectors, four-pair Category 5 UTP cabling
  • 1000BASE-T SFP-based ports: RJ-45 connectors, four-pair Category 5 UTP cabling
  • 1000BASE-SX, -LX/LH, -ZX, and CWDM SFP-based ports: LC fiber connectors (single/multimode fiber)
  • Cisco Catalyst 3560 SFP Interconnect Cable: two-pair shielded cabling, 50 cm
  • Management console port: RJ-45-to-DB-9 cable for PC connections; for terminal connections, use RJ-45-to-DB-25 female data-terminal-equipment (DTE) adaptor (can be ordered separately from Cisco; part number ACS-DSBUASYN=)

Power Connectors

  • Customers can provide power to a switch by using either the internal power supply or the Cisco RPS 2300. The connectors are located at the back of the switch.
  • Note: The Cisco Catalyst 3560-8PC and Catalyst 3560-12PC do not have an RPS port.
  • Internal-Power-Supply Connector
  • The internal power supply is an autoranging unit.
  • The internal power supply supports input voltages between 100 and 240 VAC.
  • Use the supplied AC power cord to connect the AC power connector to an AC power outlet.
  • Cisco RPS Connector
  • The connector offers connection for an optional Cisco RPS 2300 that uses AC input and supplies DC output to the switch.
  • The connector supports up to six external network devices and provides power to two failed devices at a time.
  • The connector automatically senses when the internal power supply of a connected device fails and provides power to the failed device, preventing loss of network traffic.
  • Only the Cisco RPS 2300 (model PWR-RPS2300) should be attached to the redundantpower-supply receptacle.

Indicators

  • Per-port status LEDs: Link integrity, disabled, activity, speed, full-duplex indications, PoE applied, PoE error, and PoE disabled indications
  • System-status LEDs: System, RPS, link status, link duplex, link speed, and PoE indications

Dimensions (H x W x D)

  • Cisco Catalyst 3560G-48PS: 1.73 x 17.5 x 16.1 in. (4.4 x 44.5 x 40.9 cm)

Weight

  • Cisco Catalyst 3560G-48PS: 15.5 lb (7.0 kg)

Environmental Ranges

  • Operating temperature: 32 to 113ºF (0 to 45ºC)
  • Storage temperature: -13 to 158ºF (-25 to 70ºC)
  • Operating relative humidity: 10 to 85% (noncondensing)
  • Operating altitude: Up to 10,000 ft (3049m)
  • Storage altitude: Up to 15,000 ft (4573m)

Acoustic Noise

  • ISO 7779: Bystander position operating to an ambient temperature of 25°C
  • Cisco Catalyst 3560G-48PS: 52-58 dBa

Mean Time Between Failure (MTBF)

  • Cisco Catalyst 3560G-48PS: 147,000 hours

Power Supply Rated Maximum

  • 590W (Cisco Catalyst 3560G-48PS)

Measured 100% Throughput Power Consumption

  • 443 BTU/hour

Measured 5% Throughput Power Consumption

  • 386 BTU/hour

Measured 100% Throughput Power Consumption (with maximum possible PoE Power

  • 534W
  • PoE Output BTU
    • 559 BTU/ hour

    • Measured 5% Throughput Power Consumption (with 50% PoE loads)

    • 3560G-48PS

    • Switch Power

      • 328W

    • PoE Power

      • 189W

    • Total Output BTU

      • 474 BTU/ hour

    AC Input Voltage and Current

    • 100-240 VAC (autoranging),8.0-4.0A, 50-60Hz(Cisco Catalyst3560G-48PS)

    Power Rating

    • Cisco Catalyst3560G-48PS: 0.56 kVA

    DC Input Voltages (RPS Input)

    • 14A (Cisco Catalyst (RFC 802.1s
    • IEEE 802.1w
    • IEEE 802.1x
    • IEEE 802.3ad
    • IEEE 802.3af
    • IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports
    • IEEE 802.1D Spanning Tree Protocol
    • IEEE 802.1p CoS Prioritisation
    • IEEE 802.1Q VLAN
    • IEEE 802.3 10BASE-T specification
    • IEEE 802.3u 100BASE-TX specification
    • IEEE 802.3ab 1000BASE-T specification
    • IEEE 802.3z 1000BASE-X specification
    • 1000BASE-X SFP 1470 nm
    • 1000BASE-CWDM SFP 1490 nm
    • 1000BASE-CWDM SFP 1510 nm
    • 1000BASE-CWDM SFP 1530 nm
    • 1000BASE-CWDM SFP 1550 nm
    • 1000BASE-CWDM SFP 1570 nm
    • 1000BASE-CWDM SFP 1590 nm
    • 1000BASE-CWDM SFP 1610 nm
    • RMON I and II standards
    • SNMPv1, SNMPv2c, and SNMPv3

    Safety Certifications

    • UL 60950-1, First Edition
    • CUL to CAN/CSA 22.2 No. 60950-1, First Edition
    • TUV/GS to EN 60950-1, First Edition
    • CB to IEC 60950-1 with all country deviations
    • AS/NZS 60950-1, First Edition
    • NOM (through partners and distributors)
    • CE Marking

    Electromagnetic Emissions Certifications

    • FCC Part 15 Class A
    • EN 55022 Class A (CISPR22)
    • EN 55024 (CISPR24)
    • AS/NZS CISPR22 Class A
    • CE
    • CNS 13438 Class EMC Certifications

    Features
    • Low Prices
    • Shipping within 1-2 business days
    • All used items are tested before shipping
    • All items are well packed before shipping
    • We use A class Priority tracked mail or Express Courier
    Shipping Terms

    Normally we ship within 1 business day since payment received. All items will be shipped with A class priority tracked mail.
    Large and heavyweight items as well as items with battery can be shipped only with Express Courier.
    Usual delivery time within EU is 5-10 business days, other countries 10-20 business days. But it`s not guaranteed! We can not control delivery speed after shipping. By International Post Convention the package is not considered missing within 30 days since shipped.
    If you have not received your item after 30 days, please contact us before claim.

    Payment Terms

    We accept PayPal

    Contact

    Please do not hesitate to contact us should you have any questions or concerns through private message.
    If you are satisfied with your purchase please leave us positive response. If not, please contact us before leaving negative response and we will find the best way to resolve your problem. Thank you for buying from us!

    Buy Now

    Popular Tutorials