Cisco model SPA8000 8-Port IP Telephony gateway VOIP W/ power adapter For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Cisco model SPA8000 8-Port IP Telephony gateway VOIP W/ power adapter:
$99.99
Cisco model SPA8000 8-Port IP Telephony gateway VOIP W/ power adapter Description
TheCisco SBSPA8000 8-Port IP Telephony Gateway is a full featured Analog Terminal Adapter (ATA) for small business enterprises providing enhanced communication services via a broadband connection to the Internet.
The SPA8000 features eight RJ-11 FXS ports to connect analog telephones to IP-based data networks and includes a single multi-port RJ-21 50-pin connector offering an alternative connection choice when deploying the telephony gateway in varied environments. The device also has one 10/100Base-T RJ-45 Ethernet interface to connect to either a router or multilayer switch.
Solid in design, the SPA8000 is an affordable solution that is ideally suited for use in business and consumer VoIP service offerings including call centers and multi-dwelling environments. Customers can also protect and extend their investments by continuing to utilize their existing analog telephones and teleconferencing equipment.
Installed by the end user and remotely provisioned, configured and maintained by the service provider, each SPA8000 converts voice traffic into data packets for transmission over an IP network and uses common standards for voice and data networking for reliable voice and fax operation.
Toll Quality Voice and Carrier-Grade Feature Support
The SPA8000 delivers clear, high-quality voice communication in diverse network conditions. Excellent voice quality in a demanding IP network is consistently achieved via our advanced implementation of standard voice coding algorithms. The SPA8000 is interoperable with common telephony equipment like voicemail, Fax, PBX, and interactive voice response systems.
Ironclad Security
Cisco SB understands that security for both end users and service providers is a fundamental requirement for a solid, carrier-grade telephony service. The SPA8000 supports secure, encryption-based methods for communication, provisioning and servicing.
Features
- Eight voice ports (RJ11) for analog phones or Fax machines
- Impedance Agnostics - 8 Configurable Settings
- Call Waiting, Cancel Call Waiting, Call Waiting Caller ID
- Caller ID with Name/Number (Multi-national Variants)
- Caller ID Blocking
- Call Forwarding: No answer, Busy, All
- Do Not Disturb
- Call Transfer
- Three-way Conference Calling with Local Mixing
- Message Waiting Indication - Visual and Tone Based
- Call Return
- Call Back on Busy
- Call Blocking with Toll Restriction
- Delayed Disconnect
- Distinctive Ringing - Calling and Called Number
- Off-hook Warning Tone
- Selective/Anonymous Call Rejection
- Touch Tone Phone Keypad Configuration with Interactive Voice Response (IVR)
- Fax: G.711 Pass Through or Real Time Fax over IP via T.38*
*T.38 support is dependent on fax machine and network/transport SPA8000
* Note: Many specifications are programmable within a defined range or list of options. Please see the SPA
Administration Guide for details. The target configuration profile is uploaded to the SPA8000 at the time
of provisioning. - MAC Address (IEEE 802.3)
- IPv4 - Internet Protocol v4 (RFC 791) upgradeable to v6 (RFC 1883)
- ARP - Address Resolution Protocol
- DNS - A Record (RFC 1706), SRV Record (RFC 2782)
- DHCP Client - Dynamic Host Configuration Protocol (RFC 2131)
- DHCP Server - Dynamic Host Configuration Protocol (RFC 2131)
- PPoE Client - Point to Point Protocol over Ethernet (RFC 2516)
- ICMP - Internet Control Message Protocol (RFC792)
- TCP - Transmission Control Protocol (RFC793)
- UDP - User Datagram Protocol (RFC768)
- RTP - Real Time Protocol (RFC 1889) (RFC 1890)
- RTCP - Real Time Control Protocol (RFC 1889)
- DiffServ (RFC 2475), Type of Service - TOS (RFC 791/1349)
- VLAN Tagging - 802.1p
- SNTP - Simple Network Time Protocol (RFC 2030)
- Upload Data Rate Limiting - Static and AutomaticQoS - Voice Packet Prioritization over Other Packet Types
MAC Address Cloning - Port Forwarding
- SIP channels support both UDP and TCP transport
- VPN Pass-Through with IPSec ESP, PPTP, and L2TP
Voice Gateway
- SIPv2: Session Initiation Protocol v2 (RFC 3261, 3262, 3263, 3264)
- SIP Proxy Redundancy - Dynamic via DNS SRV, A Records
- Re-registration with Primary SIP Proxy Server - SIP Support in Network Address Translation Networks - NAT (incl. STUN)
- Secure (Encrypted) Calling via Pre-Standard Implementation of Secure RTP
- Codec Name Assignment
- G.711 (a-law and ì-Law)
- G.726 (16/24/32/40 kbps)
- G.729 A
- G.723.1 (6.3 kbps, 5.3 kbps) - Dynamic Payload
- Adjustable Audio Frames per Packet
- Fax Tone Detection Pass-Through
- Fax Pass-Though - Using G.711
- DTMF: In-band & Out-of-band (RFC 2833) (SIP Info)
- Flexible Dial Plan Support with Interdigit Timers and IP Dialing
- Call Progress Tone Generation
- Jitter Buffer - Adaptive
- Frame Loss Concealment
- Full Duplex Audio
- Echo Cancellation (G.165/G.168)
- VAD - Voice Activity Detection with Silence Suppression
- Comfort Noise Generation (CNG)
- QoS (Ethernet port up-stream bandwidth control, Physical port, MAC address, Application)
- Attenuation / Gain Adjustments
- Flash Hook Timer
- MWI - Message Waiting Indicator Tones
- VMWI - Visual Message Waiting Indicator via FSK
- Polarity Control
- Hook Flash Event Signalling
- Caller ID Generation (Name & Number) - Bellcore, DTMF, ETSI
- Music on Hold Client
- Streaming Audio Server - up to 10 sessions
- System DDR SDRAM - 16M Bytes
- System Flash ROM - 4M Protected System Reset to Factory Default
- Password Protected Admin and User Access />- HTTPS with Factory Installed Client Certificate
- HTTP Digest - Encrypted Authentication via MD5 (RFC 1321)
- Authentication: EAP-TLS, EAP-TTLS, and EAP-PEAP
- SIP TLS (Transport Layer Security)
- Up to 256-bit AES Encryption
Provisioning, Administration & Maintenance
- Web Browser Administration & Configuration via Integral Web Server
- Telephone Key Pad Configuration with Interactive Voice Prompts
- Automated Provisioning & Upgrade via HTTPS, HTTP, TFTP
- Asynchronous Notification of Upgrade Availability via NOTIFY
- Non-intrusive, In-Service Upgrades
- Report Generation & Event Logging
- Stats in BYE Message
- Syslog & Debug Server Records
- Per Line and Purpose Configurable Syslog and Debug Options
Physical Interfaces
- 8 port standard FXS voice ports (RJ-11)
- RJ-21 (50-pin telco connector) multi-port voice connection
- 1 WAN 100baseT RJ-45 Ethernet Port (IEEE 802.3)
- Reset button
Subscriber Line Interface Circuit (SLIC)
- Ring Voltage: 40-90 Vpk Configurable
- Ring Frequency: 20 Hz - 25 Hz
- Ring Waveform: Trapezoidal
- Maximum Ringer Load: 5 REN
- On-hook/off-hook Characteristics:
- On-hook voltage (tip/ring): -46 ~ -56V
- Off-hook current: 18-25 mA - Terminating Impedance: 600 ohm resistive or 270 ohm + 750ohm//
- 150nF complex impedance
- Frequency Response 300 – 3400Hz
- Return Loss (600 ohm, 300-3400Hz) Up to 20dB
- Insertion Loss (1 Vrms @1 kHz) 3dB – 4dB
- THD (350 mV peak @ 300 Hz) Up to 3%
- Idle Channel Noise -72 dB (typ.)
- Longitudinal Balance 55 dB (typ.)
- Off Hook Threshold (Line Seizure) Rdc < 1000 ohm
- On Hook Threshold (Line Release) Rdc >10000 ohm
- Rdc DC Supervisory Range Rdc > 450 ohm
Regulatory Compliance
- FCC (Part 15 Class B), CE, ICES-003, C-Tick Certification, RoHS, UL
Power Supply
- Switching Type (100-240v) Automatic
- DC Input Voltage: 12V DC at 3.0 A Max.
- Power Adapter: 100-240v - 50-60Hz AC Input
Indicator Lights/LED
- Power, Ethernet, USB, Voice Status, Phone Guide - Service Providers Only
- Provisioning Guide - Service Providers 6.69 x 1.54 x 8.66” (170 x 39 x 220 mm) W x H x D
- Weight 2.85 lbs (1.30 kg)
- Operating Temp. 32 to 113°F (0°C to 45°C)
- Storage Temp. -13 to 185°F (-20°C to 85°C)
- Operating Humidity 10% to 90% Non-Condensing, operating and non-operating
- Storage Humidity 10% to 90% Non-Condensing, operating and non-operating
Package Contents
- SPA8000 Phone Adapter Unit
- 12v Power Adapter
- RJ45 Ethernet Cable
- Quick Installation Guide
MOST ORDERS IN CANADA AND USA QUALIFY FOR COMBINED SHIPPING. $2 MORE PER sale. LARGE WHOLESALE LOTS AND HEAVIER ITEMS WILL NOT QUALIFY FOR COMBINED SHIPPING. OVERSEAS ORDERS DONOT QUALIFY. PLEASE CONTACT ME FOR A COMBINED SHIPPING RATE.
WE SHIP ORDERS OUT 5 DAYS A WEEK. ORDERS ARE PROCESSED IN ONE BUSINESS DAY AFTER PAYMENT IS RECEIVED.
CALCULATED WITH HIGHEST SHIPPING COST FIRST AND THEN $2 MORE PER sale AFTER.
ITEMS MUST BE PAID WITH ONE INVOICE TO QUALIFY FOR COMBINED SHIPPING RATE.
ITEMS BEING SENT TO NUNAVUT, NORTHWEST TERRITORIES, AND YUKON WILL BE CHARGED HIGHER SHIPPING RATES. PLEASE EMAIL ME FOR RATES.
WE STRIVE TO EARN OUR \"5 STAR\" RATING. PLEASE DO NOT HESITATE TO ASK QUESTIONS OR TO TELL US ANY CONCERNS YOU MAY HAVE.
HERE IS MY LINK TO PROVIDE YOU WITH MORE DETAILS ON MY BUSINESS. />
THANK YOU FOR YOUR BUSINESS. OUR CUSTOMERS ARE OUR PRIORITY!
See my other listings for more great items! Payment
I ACCEPT PAYPAL ONLY.
TAXES ARE AS FOLLOWS:
NO TAXES FOR UNITED STATES OR OTHER INTERNATIONAL COUNTRIES
GST/HST WILL BE APPLIED TO ALL CANADIAN INVOICES. RATE VARIES WITH PROVINCE/TERRITORY.
I AM REQUIRED BY LAW TO CHARGE APPROPRIATE TAXES. THANK YOU FOR UNDERSTANDING.
Shipping
Shipping
txzj pxzj229 txzj-4 txzj1
