HP Pro Cure Networking Switch 1410-24G - 24 Ports, Model J9561A For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
HP Pro Cure Networking Switch 1410-24G - 24 Ports, Model J9561A:
$99.46
• two mounting brackets• eight 8-mm M4 screws to attach themounting brackets to the switchauto-sensing 10/100/1000Base-T RJ-45 ports with Auto-MDIX.■ 1410-24G Switch includes two dual-personality uplink ports (1000Base-TRJ-45 or mini-GBIC).■ Plug-and-play networking—all ports are enabled—just connect thenetwork cables to active network devices and your switched network isoperational.■ Auto-MDIX on all twisted-pair ports, meaning that all twisted-pairconnections can be made using straight-through cables. Cross-over cablesare not required, although they will also work.■ Automatically negotiated full-duplex operation for the 10/100/1000 RJ-45ports when connected to other auto-negotiating devices.■ Automatic learning of the hardware addresses in each switch’s 8000-address forwarding table (4000-addresses for the 1410-8G Switch).■ Support for up to 9216-byte Jumbo frame size to improve performance oflarge data transfers.■ Support for IEEE 802.1p prioritization Quality of Service (QoS) to deliverdata to devices based on the priority and type of traffic.■ Fanless designed enables quiet operation for deployment in open spaces.1410-24G Switches are multiportswitches that can be used to build high-performance switched workgroupnetworks. These switches are store-and-forward devices that offer low latencyfor high-speed networking.
Dual-personality ports use either the 10/100/1000Base-T RJ-45 connector, or asupported ProCurve mini-GBIC (Small Form-factor Pluggable (SFP)) for fiberopticconnecti
These switches can be directly connected to computers, printers, and serversto provide dedicated bandwidth to those devices, and you can build a switchednetwork infrastructure by connecting the switch to hubs, other switches, orrouters.Using ProCurve mini-GBICs, the 1410-24G Switch supports optional networkconnectivity
The front panels of the switches provide status LEDs for system monitoring.
The 1410-24G Switch does not have a power switch; it is powered on whenconnected to an active AC power source. The switch automatically adjusts toany AC voltage between 100-127 and 200-240 volts and either 50 or 60 Hz. Thereare no voltage range settings required.
auto-sensing 10/100/1000Base-T ports.All these ports have the “Auto-MDIX” feature, which means that you canuse either straight-through or crossover twisted-pair cables to connectany network devices to the switch.■ (1410-24G Switch only) Two dual-personality ports for either 10/100/1000Base-T RJ-45 uplinks, or mini-GBIC (SFP) slots for fiber uplinks Width Depth Height Weight
1410-24G Switch (J9561A) 33.6 cm (13.23 in) 16.9 cm (6.65 in) 4.4 cm (1.73 in) 1.35 kg (2.98 lbs)
