HP ProLiant BL460c Gen8 Blade Server 666158-B21 10GB FLB BAREBONE BASE MODEL For Sale

HP ProLiant BL460c Gen8 Blade Server 666158-B21 10GB FLB BAREBONE BASE MODEL
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Buy Now

HP ProLiant BL460c Gen8 Blade Server 666158-B21 10GB FLB BAREBONE BASE MODEL:
$49.95

HP ProLiant BL460c Gen8 Blade Server 666158-B21 10GB FLB BAREBONE BASE MODELB42

HP ProLiant BL460c Gen8 Blade Server 641016-B21 10GB FLB BAREBONE BASE MODEL

For proper functionality you must already have a working HP BladeSystem c3000 or c7000 Enclosure to be able to power up, use and operate this blade server correctly!

sale includes as follows:

HP ProLiant BL460c Gen8 10Gb FlexibleLOM Blade Server CTO BASE MODEL BAREBONE 666158-B21,

NO CPUs,

NO HEATSINK,

NO RAM,

NO HDD

Factory Specifications as follows:

Processors:
• Up to two (2) Intel® Xeon® E5-2600 family processors
• Intel® C600 Series Chipset Memory:
• Sixteen (16) DDR3 DIMM memory slots (8 per processor)
• Up to 512GB (16 x 32GB) up to 1333MHz, using PC3-10600 DDR3 registered (RDIMM) memory
Internal Drive Support:
• Two (2) hot-plug small form factor (SFF) drive bays; support for SAS, SATA, and SSD hot-plug hard drives Network Controller:
• One (1) HP FlexFabric 10Gb 2-port 554FLB FlexibleLOM (NOTE: Supports FCoE, Flex-10, TCP/IP offload engine, hardware-based accelerated iSCSI, iSCSI boot, and autosensing 10Gb/1Gb Ethernet. NOTE: Each port is autosensing 1Gb/10Gb, and can interoperate with 1Gb HP BladeSystem c-Class interconnect components. Both ports will operate at the same speed. NOTE: FlexFabric and Fibre Channel over Ethernet (FCoE) capabilities require the use of an HP Virtual Connect FlexFabric module or HP 10GbE Pass-Thru Module.) Mezzanine Support:
• Two (2) I/O expansion mezzanine slots:
• x16 PCIe 3.0 Type A (supports Type A mezzanine cards) (expansion slot 1). NOTE: This expansion slot supports dual-port mezzanine cards: one port is routed to interconnect module bay 3 and the other to bay 4.
• x16 PCIe 3.0 Type B (supports Type A and Type B mezzanine cards (expansion slot 2). NOTE: This expansion slot supports dual-port and quad-port mezzanine cards. For dual-port cards, one port is routed to interconnect module bay 5 and the other to bay 6.For quad-port cards, one port is routed to interconnect module bay 5, one to bay 6, one to bay 7, and one to bay 8. NOTE: A second processor must be installed (in processor slot 2) to have access to the second expansion slot (expansion slot 2).
• Mezzanine card options include: Dual-port 10Gb FlexFabric and10Gb Flex-10 for additional network ports, Dual-port 8Gb Fibre Channel HBA for SAN connectivity, QDR and FDR InfiniBand for low latency and high bandwidth server interconnectivity Form Factor:
• HP ProLiant BL460c Gen8 is a half-height server blade that plugs into the HP BladeSystem c3000 and c7000 enclosures

sale Includes as shown in picture, nothing else unless specified in the description, please read our software policy before purchasing any items that contain software.



Buy Now

Popular Tutorials