HP ProLiant MicroServer Gen8 Xeon E3-1220L v2 16GB RAM ILO For Sale

HP ProLiant MicroServer Gen8 Xeon E3-1220L v2 16GB RAM ILO


Buy Now

HP ProLiant MicroServer Gen8 Xeon E3-1220L v2 16GB RAM ILO:
$350.00


Physical (H x W x D) (with feet)23.24x 23 x 24.5 cm (9.15 x 9.06 x 9.65 in)Weight (approximate)
  • Maximum (all hard drives, power supply and processor installed)

    • 9.8 kg (21.60 lb)

  • Minimum (one hard drive, power supply, and processor installed)

    • 6.8 kg (15.13 lb)

Electrical requirements (per power supply)

  • Rated line voltage

    • 100 - 127 V ac

    • 200 - 240 V ac

  • Rated input current

    • 3.5 A (at 110 V ac)

    • 2 A (at 200 V ac)

  • Rated input frequency: 50 to 60 Hz

  • Rated input power

    • For 150W Power Supply:
      • 192 W (at 100 V ac),

      • 185 W (at 200 V ac)

        For 200W Power Supply 243 W (at 100 V ac), 237 W (at 200 V ac)

    • 184.9 W (at 200 V ac)

BTU rating
  • Maximum

    For 150 W Power Supply:

    • 682 BTU/hr (at 100 V ac)

    • 665 BTU/hr (at 200 V ac)

For 200 W Power Supply:
  • 838.86 BTU/hr (at 100 V ac)

  • 825.22 BTU/hr (at 200 V ac)

Power supply output (per power supply)
  • Rated steady-state power

    • 150 W (at 100 V ac)

    • 150 W (at 200 V ac)

  • Maximum peak power

    • 200 W (at 100 V ac)

    • 200 W (at 200 V ac)

HP Dynamic Smart Array B120i controller drive interface - transfer rateUp to 6 Gb/s SATA (Serial ATA)SATA connectors5 internal connectors with non-hot-plug supportServer interfacePCIe 2.0SATA speedx2 6 Gb/s SATA physical links (compatible with 3 Gb/s SATA)Logical drives supportedNoneHost memory addressing64-bit, supporting greater than 4GB server memory spaceHot plug supportNoRAID support
  • RAID 0 (Striping), RAID 1 (Mirroring)

  • RAID 1+0 (Striping & Mirroring)


HP Ethernet 1Gb 2-port NC332i adapter class="ods_si_list" style="margin: 1ex 0px 1ex 35px; padding: 0px;">
  • IEEE 802.3 10Base-T

  • IEEE 802.3ab 1000Base-T

  • IEEE 802.3u 100Base-TX

  • Energy Efficient Ethernet (EEE) compliant with IEEE Std 802.3az (default is disabled)

  • Data transfer methodSingle lane (x1), 100 MHz PCI Express Reference ClockControllerBCM5720Network transfer rate
    • 10Base-T (Half-Duplex): 10 Mb/s

    • 10Base-T (Full-Duplex): 20 Mb/s

    • 100Base-TX (Half-Duplex): 100 Mb/s

    • 100Base-TX (Full-Duplex): 200 Mb/s

    • 1000Base-TX (Half and Full-Duplex): 2000 Mb/s

    ConnectorRJ-45 connectorCable support
    • 10Base-T: Categories 3, 4 or 5 UTP; up to 328 ft (100 m)

    • 10/100/1000Base-TX: Category 5 UTP; up to 328 ft (100 m)



    Buy Now

    Popular Tutorials