Juniper EX3300-24P 24-Port 10/100/1000 BASE T 4 x 10 Gigabit Ethernet SFP For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Juniper EX3300-24P 24-Port 10/100/1000 BASE T 4 x 10 Gigabit Ethernet SFP :
$749.00
- Home
- About Us
- Payment
- Shipping
- Returns
- response
- Contact Us
- Welcome to GreenTekSolutions-B
- Add to Favorites
- Need Help!
- HP (31)
- Networking (40)
- Processors (1)
- Dell (14)
- Laptops (4)
- Servers (18)
- Apple (3)
- IBM (3)
- Memory Ram (1)
- Switch (38)
- Hard Drive (10)
- Cisco (40)
- Access Point (1)
- Nortel (2)
- Avaya (1)
- Telecom (9)
- Juniper (2)
- Firewall (6)
- KVM (1)
- Tape Drive (2)
- LTO-4 (1)
- Brocade (6)
- Netapp (2)
- EMC (5)
- Other (66)
The BEST in Buyback Programs!
GreenTek Solutions LLC
Call us today for more information.
Our Hassle-free buyback program offers:
- Free evaluation of your I.T equipment!
- Purchase of I.T equipment in its current condition!
- Shipping or pick-up is on us!
- Free recycling of out of date equipment!
Item Description
This item is in used but good working condition. It was pulled from a working environment. Since this item is in used condition, it is possible that it can show some normal signs of wear, for example: scratches or scuffs but nothing that will affect performance.
We offer a 30 day satisfaction guaranteed warranty on all the items listed in our store. If for some reason you\'re not happy with your purchase, please don\'t hesitate to contact us and we will try our best to fix it.
Included Items
1x Juniper EX3300-24P 24-Port 10/100/1000 BASE T 4 x 10 Gigabit Ethernet SFP
1x Power Cord
1x Serial Console Cable
NOTE: Rackmount Kit is not
AA
Boot Output
U-Boot 1.1.6 (Jun 4 2012 - 01:56:18)
Board: EX3300-24P 5.14
EPLD: Version 03.110621 (0x02)
DRAM: Initializing (1GB)
Flash: 8 MB
Firmware Version: --- 01.00.00 ---
USB: scanning bus for devices...
Root Hub 0: 2 USB Device(s) found
Root Hub 1: 1 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
ELF file is 32 bit
Consoles: U-Boot console
FreeBSD/arm U-Boot loader, Revision 1.1
(builder@greteth, Mon Jun 4 01:40:05 UTC 2012)
Memory: 1024MB
bootsequencing is enabled
bootsuccess is set
new boot device = disk0s2:
Loading /boot/defaults/loader.conf
/kernel data=0x8074f4+0xa5f9c syms=[0x4+0xe03e0+0x4+0xb7e39]
Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel]...
Kernel entry at 0x1400100 ...
GDB: debug ports: uart
GDB: current port: uart
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
Copyright (c) 1996-2013, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
JUNOS 11.4R8.5 #0: 2013-05-28 20:16:06 UTC
can\'t re-use a leaf (all_slot_serialid)!
CPU: Early Feroceon 88FR571 rev 0 (Marvell core)
WB enabled EABT branch prediction enabled
32KB/32B 4-way Instruction cache
32KB/32B 4-way write-back-locking-C Data cache
real memory = 1073741824 (1024 MB)
avail memory = 1034014720 (986 MB)
SOC: Marvell MV78100, TClock 200MHz
ETHERNET SOCKET BRIDGE initialising
Initializing EXSERIES platform properties ...
mbus0: on motherboard
ic0: at mem 0xf1020200-0xf102023b on mbus0
timer0: at mem 0xf1020300-0xf102032f irq 8 on mbus0
gpio0: at mem 0xf1010100-0xf101011f irq 56,57,58,59 on mbus0
uart0: <16550 or compatible> at mem 0xf1012000-0xf101201f irq 12 on mbus0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> at mem 0xf1012100-0xf101211f irq 13 on mbus0
ehci0: <88F5XXX Integrated USB 2.0 controller> at mem 0xf1050000-0xf1050fff irq 72,16 on mbus0
usb0: EHCI version 1.0
usb0 on ehci0
usb0: USB revision 2.0
uhub0: Marvell EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 2
ehci1: <88F5XXX Integrated USB 2.0 controller> at mem 0xf1051000-0xf1051fff irq 72,17 on mbus0
usb1: EHCI version 1.0
usb1 on ehci1
usb1: USB revision 2.0
uhub1: Marvell EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 1 port with 1 removable, self powered
ehci2: <88F5XXX Integrated USB 2.0 controller> at mem 0xf1052000-0xf1052fff irq 72,18 on mbus0
usb2: EHCI version 1.0
usb2 on ehci2
usb2: USB revision 2.0
uhub2: Marvell EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 1 port with 1 removable, self powered
mge0: at mem 0xf1072000-0xf1073fff irq 41,42,43,40,70 on mbus0
mge0: hardware MAC address 3c:8a:b0:da:33:ff
miibus0: on mge0
e1000phy0: on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
i2c0: at mem 0xf1011000-0xf101101f on mbus0
8564 rtc0: <8564 RTC> on i2c0
poe0: on i2c0
i2c1: at mem 0xf1011100-0xf101111f on mbus0
pcib0: at mem on mbus0
pci0: on pcib0
mpfe0: mem 0xe8000000-0xebffffff irq 112 at device 1.0 on pci0
mpfe0: 0x100000 bytes of rid 0x10 res 3 failed (0, 0xffffffff).
syspld0 at mem 0xf9000000-0xf90fffff on mbus0
cfi0: at mem irq 1 on mbus0
Initializing product: 113 ..
bmeb: bmeb_lib_init done 0xc40c7800, addr 0xc1ca7bf4
bme0:Virtual BME driver initializing
Timecounter \"CPU Timer\" frequency 200000000 Hz quality 1000
da0 at umass-sim0 bus 0 target 0 lun 0
da0: Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C)
Trying to mount root from ufs:/dev/da0s2a
Invalid time in real time clock.
Check and reset the date immediately!
Attaching /packages/jbase via /dev/mdctl...
Mounted jbase package on /dev/md0...
Verified manifest signed by PackageProduction_11_4_0
Verified jboot signed by PackageProduction_11_4_0
Verified jbase-ex-11.4R8.5 signed by PackageProduction_11_4_0
Mounted fips-mode-arm package on /dev/md1...
Verified manifest signed by PackageProduction_11_4_0
Verified fips-mode-arm-11.4R8.5 signed by PackageProduction_11_4_0
Mounted jcrypto-ex package on /dev/md3...
Verified manifest signed by PackageProduction_11_4_0
Verified jcrypto-ex-11.4R8.5 signed by PackageProduction_11_4_0
Mounted jdocs-ex package on /dev/md5...
Verified manifest signed by PackageProduction_11_4_0
Verified jdocs-ex-11.4R8.5 signed by PackageProduction_11_4_0
Mounted jkernel-ex-3300 package on /dev/md7...
Verified manifest signed by PackageProduction_11_4_0
Verified jkernel-ex-3300-11.4R8.5 signed by PackageProduction_11_4_0
Mounted jpfe-ex33x package on /dev/md9...
Verified manifest signed by PackageProduction_11_4_0
Verified jpfe-ex33x-11.4R8.5 signed by PackageProduction_11_4_0
Mounted jroute-ex package on /dev/md11...
Verified manifest signed by PackageProduction_11_4_0
Verified jroute-ex-11.4R8.5 signed by PackageProduction_11_4_0
Mounted jswitch-ex package on /dev/md13...
Verified manifest signed by PackageProduction_11_4_0
Verified jswitch-ex-11.4R8.5 signed by PackageProduction_11_4_0
Mounted jweb-ex package on /dev/md15...
Verified manifest signed by PackageProduction_11_4_0
Verified jweb-ex-11.4R8.5 signed by PackageProduction_11_4_0
Executing Automatic reboot in progress...
** /dev/da0s2a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 45335 free (31 frags, 5663 blocks, 0.0% fragmentation)
Computing slice and partition sizes for /dev/da0 ...
** /dev/da0s3e
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 62084 free (108 frags, 7747 blocks, 0.2% fragmentation)
savecore: could not be determined
No dump exists
** /dev/da0s3d
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 188781 free (29 frags, 23594 blocks, 0.0% fragmentation)
** /dev/da0s4d
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 31579 free (27 frags, 3944 blocks, 0.1% fragmentation)
Creating initial configuration...mgd: commit complete
Setting initial options: debugger_on_panic=NO debugger_on_break=NO.
Starting optional daemons: .
Doing initial network setup:
.
Initial interface configuration:
additional daemons:.
Additional routing options:kern.module_path: /boot//kernel;/boot/modules ->
the EX-series platform NETPFE module
kld netpfe drv: ifpfed_eth ifpfed_ml_cmnkld platform:
ex_ifpfe if_vcpkld peertype: peertype_hcm peertype_pfem peertype_sfi peertype_slavere grat_arp_on_ifup=YES: net.link.ether.inet.grat_arp_on_ifup: 1 -> 1
ipsec kld.
Doing additional network setup:.
Starting final network daemons:.
setting ldconfig path: /usr/lib /opt/lib
starting standard daemons: cron.
Local package initialization:.
kern.securelevel: -1 -> 1
starting local daemons:set cores for group access
root@:RE:0%
root@:RE:0% 6:14:21 UTC 2017
root@:RE:0% dev/da0 has dual root support
root@:RE:0% 1a
root@:RE:0% CLEAN; SKIPPING CHECKS
root@:RE:0% free (23 frags, 5648 blocks, 0.0% fragmentation)
root@:RE:0%
root@:RE:0% yu0)
root@:RE:0%
root@:RE:0%
root@:RE:0%
root@:RE:0%
root@:RE:0% .4R8.5 built 2013-05-28 20:16:06 UTC
root@:RE:0%
root@:RE:0%
root@:RE:0% cli
{master:0}
root> show chassis hardware
Hardware inventory:
Item Version Part number Serial number Description
Chassis GE0213315065 EX3300-24P
Routing Engine 0 REV 14 750-034300 GE0213315065 EX3300 24-Port POE+
FPC 0 REV 14 750-034300 GE0213315065 EX3300 24-Port POE+
CPU BUILTIN BUILTIN FPC CPU
PIC 0 BUILTIN BUILTIN 24x 10/100/1000 Base-T
PIC 1 REV 14 750-034300 GE0213315065 4x GE/XE SFP+
Power Supply 0 PS 550W AC
Fan Tray Fan Tray
{master:0}
root> show system license
License usage: none
Licenses installed: none
{master:0}
root> show chassis environment
Class Item Status Measurement
Power FPC 0 Power Supply 0 OK
Temp FPC 0 CPU OK 46 degrees C / 114 degrees F
FPC 0 EX-PFE1 OK 52 degrees C / 125 degrees F
FPC 0 GEPHY1 OK 32 degrees C / 89 degrees F
FPC 0 Fan Exhaust OK 42 degrees C / 107 degrees F
FPC 0 SFP+ PHY OK 37 degrees C / 98 degrees F
FPC 0 Local Sensor OK 39 degrees C / 102 degrees F
Fans FPC 0 Fan 1 OK Spinning at normal speed
FPC 0 Fan 2 OK Spinning at normal speed
{master:0}
root>
- PAYMENT
- SHIPPING
- RETURNS
- TERMS
- GUARANTEE
- ABOUT US
- PAYMENT PAYMENT
- SHIPPING SHIPPING
- RETURNS RETURNS
- TERMS TERMS
- GUARANTEE GUARANTEE
- ABOUT US ABOUT US
• Only PayPal and major credit cards are accepted. (Amex, Visa, MasterCard)
• Immediate Payment is required after the Winning offer
• Item will be shipped immediately on the same or next business day of receiving full payment
• Shipping within the 48 Contiguous United States is Free
• International buyers are welcome.
• Alaska, Hawaii and Puerto Rican buyers have to contact me for a shipping quote prior offerding.
• P.O. Box Delivery is offered but is possible that there can be shipping charges.
• APO/FPO Delivery is offered but is possible that there can be shipping charges.
• PayPal Confirmed Addresses Only
• Items Will be Shipped by USPS or FedEx on the Same or Next Business day of receiving full payment
• UPS or FedEx Tracking Number will be provided
\"AS-IS\" items have no warranty and do not qualify for refunds or exchanges. Refunds are only provided if a suitable replacement is not available. The buyer must notify GreenTek Solutions in writing (e-mails qualify) of any problem within the documented warranty period to qualify for refund or replacement. GreenTek Solutions is not obligated to offer warranty services beyond the stated warranty period. Return Authorization (RMA) is required for defective product returns. Credit for returned item will be issued after the return of the defective product.
Upon receipt of Return Authorization, the buyer has 3 Business Days to ship item to us and provide tracking number via e-mail. GreenTek Solutions does not issue refunds for any form of shipping, either to or from the buyer. Items that are damaged while in the buyer\'s possession, regardless of circumstances, do not qualify for a refund or exchange. In addition, items damaged by improper packaging when returned to GreenTek Solutions will not qualify for refund or exchange.
Items with Warranty: We affix \"warranty labels\" on all items that have a warranty. Evedince of tampering, removal or broken seal, will VOID the warranty.
Texas buyers and local picked up customers at our office - GreenTek Solutions - will be charged 8.25% Sales Tax. Buyers are required to provide payment within 1 week from sale close, unless other arrangements are made. Late payments may result in order cancellation.
International sales over $1000 will only ship after payment has cleared. International sales over $1000 will only ship after payment has cleared.
PLEASE do not ask us to reduce the amount of the invoice for customs purposes, because we will not do it. We will only declare items purchased as a commercial sample, nothing else (gift, return, etc.).
All of our items work for servers, Not for desktop. Buyer may return defective Goods for replacement or refund (as elected by Seller) within 30 days of purchase. Subject to Seller\'s reasonable approval, Buyer may return for credit within 30 days of purchase non-defective Goods the sales price of which, together with the sales price of any other non-defective items previously returned to Seller by Buyer, do not exceed 2% of the aggregate sales prices of all non-defective products purchased by Buyer from Seller. Non-defective, special order products are normally not accepted for return; other returns are handled on a case-by-case basis in Seller\'s sole discretion. All returns must be accompanied by an authorized RMA number, which is valid for 15 days after the date of issuance, and returns of non-defective normally stocked items in resalable condition will be accepted for credit subject to a restocking charge of no less than 15% of the sales price.
A Return Material Authorization (RMA) number must be obtained for all returns. Please contact GreenTek Solutions RMA for assistance.
GreenTek Solutions entirely eliminates the risk associated with electronic recycling by managing the entire process from pick-up to final destination. We recover, re-market and recycle technology from companies from all sizes, large public retail, government entities and education institutions.
- HOME
- ABOUT US
- PAYMENT
- Shipping
- RETURN
- response
- CONTACT US
Read More PAYMENT OPTIONS © Copyright 2017, GreenTekSolutions-B All rights reserved. store Designed & Developed By
