Juniper EX4500 Virtual Chassis w/128G VC 2x Power Supplies | EX4500-40F-VC1-FB For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Juniper EX4500 Virtual Chassis w/128G VC 2x Power Supplies | EX4500-40F-VC1-FB:
$989.95
Juniper EX4500 Virtual Chassis w/128G VC 2x Power Supplies | EX4500-40F-VC1-FB
Manfacturer: Juniper Networks
Model: EX4500
Number of Ports: 40
Port Speed: 10 Gigabit Ethernet
Plug-Ins: EX4500-VC1-128G
Notes: 40 x SFP+ Ports (no SFP+ modules), 2x Power Supplies (EX4500-PWR1-AC-FB)
Rack Ears / Rails: Yes
Factory Reset: Yes
Good used condition. No major marks or damages. You will findwear and tear from normal use.
Please see the photos for details.
This switch powers on and produces the console readout provided below.
No cords, cables, accessories or media will be included. Listing is only for the server you see in the photos.
30 Day Warranty!
Console output during bootload:
U-Boot 1.1.6 (Mar 28 2011 - 04:06:04)
Board: EX4500-40F 10.10
EPLD: Version 6.2 (0x80)
DRAM: Initializing (1024 MB)
FLASH: 8 MB
Firmware Version: 01.00.00
USB: scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
ELF file is 32 bit
Consoles: U-Boot console
FreeBSD/PowerPC U-Boot bootstrap loader, Revision 2.4
(builderdagmathjunipernet, Mon Mar 28 01:49:54 UTC 2011)
Memory: 1024MB
bootsequencing is enabled
bootsuccess is not set
new boot device = disk0s2:
Loading /boot/defaults/loader.conf
/kernel data=0x9dd570+0xb17c8 syms=[0x4+0x87630+0x4+0xc3ecb]
Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel]...
Kernel entry at 0x800000e0 ...
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
EX4500: M2 Legacy module is found, mode: VC
Copyright (c) 1996-2012, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
JUNOS 12.1R2.9 #0: 2012-05-31 09:24:31 UTC
/>can\'t re-use a leaf (all_slot_serialid)!
Timecounter \"decrementer\" frequency 62500000 Hz quality 0
cpu0: Freescale e500v2 core revision 2.2
cpu0: HID0 />real memory = 1048576000 (1000 MB)
avail memory = 1026592768 (979 MB)
ETHERNET SOCKET BRIDGE initialising
Initializing EXSERIES platform properties ...
nexus0: <PPC e500 Nexus device>
ocpbus0: <on-chip peripheral bus> on nexus0
openpic0: <OpenPIC in on-chip peripheral bus> iomem 0xfef40000-0xfef600b3 on ocpbus0
memctl0: <mpc85xx memory ECC monitor> iomem irq 32,34 on ocpbus0
i2c0: <MPC85XX OnChip i2c Controller> iomem 0xfef03000-0xfef03014 irq 59 on ocpbus0
8564 rtc0: <8564 RTC> on i2c0
i2c1: <MPC85XX OnChip i2c Controller> iomem 0xfef03100-0xfef03114 irq 59 on ocpbus0
uart0: <16550 or compatible> iomem 0xfef04500-0xfef0450f irq 58 on ocpbus0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> iomem 0xfef04600-0xfef0460f irq 58 on ocpbus0
lbc0: <Freescale 8533 Local Bus Controller> iomem irq 35 on ocpbus0
cb fpga: un-supported RE/board:72
cfi0: <AMD/Fujitsu - 8MB> iomem 0xff800000-0xffffffff on lbc0
cb fpga: un-supported RE/board:72
syspld0 iomem 0xff000000-0xff00ffff on lbc0
tsec0: <eTSEC ethernet controller> iomem 0xfef24000-0xfef24fff irq 45,46,50 on ocpbus0
tsec1: <eTSEC ethernet controller> iomem 0xfef25000-0xfef25fff irq 51,52,56 on ocpbus0
tsec2: <eTSEC ethernet controller> iomem 0xfef26000-0xfef26fff irq 47,48,49 on ocpbus0
tsec3: <eTSEC ethernet controller> iomem 0xfef27000-0xfef27fff irq 53,54,55 on ocpbus0
tsec3: hardware MAC address a8:d0:e5:ba:51:7c
miibus0: <MII bus> on tsec3
e1000phy0: <Marvell 88E1112 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
pcib0: <Freescale MPC8548 PCI host controller> iomem on ocpbus0
pci0: <PCI bus> on pcib0
pci0: <serial bus, USB> at device 18.0 (no driver attached)
ehci0: <Philips ISP156x USB 2.0 controller> mem 0xf0001000-0xf00010ff irq 21 at device 18.1 on pci0
usb0: EHCI version 1.0
usb0: <Philips ISP156x USB 2.0 controller> on ehci0
usb0: USB revision 2.0
uhub0: Philips EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 2
pcib1: <Freescale MPC8548 PCI Express host controller> iomem on ocpbus0
pci1: <PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 0.0 on pci1
pci2: <PCI bus> on pcib2
pcib3: <PCI-PCI bridge> irq 21 at device 0.0 on pci2
pci3: <PCI bus> on pcib3
pcib4: <PCI-PCI bridge> irq 21 at device 1.0 on pci3
pci4: <PCI bus> on pcib4
mpfe0: <Juniper EX-series Packet Forwarding Engine> mem 0xc0000000-0xc3ffffff irq 18 at device 0.0 on pci4
mpfe_adcr_shadow_alloc: allocated idx: 0
pcib5: <PCI-PCI bridge> irq 0 at device 2.0 on pci3
pci5: <PCI bus> on pcib5
pcib6: <PCI-PCI bridge> irq 21 at device 3.0 on pci3
pci12: <PCI bus> on pcib6
mpfe1: <Juniper EX-series Packet Forwarding Engine> mem 0xd4000000-0xd7ffffff irq 19 at device 0.0 on pci12
mpfe_adcr_shadow_alloc: allocated idx: 1
pcib7: <PCI-PCI bridge> irq 21 at device 5.0 on pci3
pci13: <PCI bus> on pcib7
mpfe2: <Juniper EX-series Packet Forwarding Engine> mem 0xd8000000-0xdbffffff irq 18 at device 0.0 on pci13
mpfe_adcr_shadow_alloc: allocated idx: 2
pcib8: <PCI-PCI bridge> irq 21 at device 7.0 on pci3
pci14: <PCI bus> on pcib8
mpfe3: <Juniper EX-series Packet Forwarding Engine> mem 0xdc000000-0xdfffffff irq 19 at device 0.0 on pci14
mpfe_adcr_shadow_alloc: allocated idx: 3
pcib9: <PCI-PCI bridge> irq 21 at device 9.0 on pci3
pci15: <PCI bus> on pcib9
mpfe4: <Juniper EX-series Packet Forwarding Engine> mem 0xe0000000-0xe3ffffff irq 19 at device 0.0 on pci15
mpfe_adcr_shadow_alloc: allocated idx: 4
pcib10: <PCI-PCI bridge> irq 0 at device 10.0 on pci3
pci16: <PCI bus> on pcib10
pcib11: <PCI-PCI bridge> irq 21 at device 11.0 on pci3
pci17: <PCI bus> on pcib11
mpfe5: <Juniper EX-series Packet Forwarding Engine> mem 0xe4000000-0xe7ffffff irq 19 at device 0.0 on pci17
mpfe_adcr_shadow_alloc: allocated idx: 5
pcib12: <PCI-PCI bridge> irq 21 at device 12.0 on pci3
pci18: <PCI bus> on pcib12
mpfe6: <Juniper EX-series Packet Forwarding Engine> mem 0xe8000000-0xebffffff irq 18 at device 0.0 on pci18
mpfe_adcr_shadow_alloc: allocated idx: 6
pcib13: <PCI-PCI bridge> irq 0 at device 13.0 on pci3
pci19: <PCI bus> on pcib13
pcib14: <PCI-PCI bridge> irq 21 at device 14.0 on pci3
pci20: <PCI bus> on pcib14
mpfe7: <Juniper EX-series Packet Forwarding Engine> mem 0xec000000-0xefffffff irq 18 at device 0.0 on pci20
mpfe_adcr_shadow_alloc: allocated idx: 7
pcib15: <PCI-PCI bridge> irq 0 at device 15.0 on pci3
pci21: <PCI bus> on pcib15
Initializing product: 87 ..
bmeb: bmeb_lib_init done 0x82b6c800, addr 0x809dfeec
bme0:Virtual BME driver initializing
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <ST ST72682 2.10> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 2000MB (4096000 512 byte sectors: 255H 63S/T 254C)
Trying to mount root from ufs:/dev/da0s2a
Invalid time in real time clock.
Check and reset the date immediately!
Attaching /packages/jbase via /dev/mdctl...
Mounted jbase package on /dev/md0...
Verified manifest signed by PackageProduction_12_1_0
Verified jboot signed by PackageProduction_12_1_0
Verified jbase-ex-12.1R2.9 signed by PackageProduction_12_1_0
Mounted fips-mode-powerpc package on /dev/md1...
Verified manifest signed by PackageProduction_12_1_0
Verified fips-mode-powerpc-12.1R2.9 signed by PackageProduction_12_1_0
Mounted jcrypto-ex package on /dev/md3...
Verified manifest signed by PackageProduction_12_1_0
Verified jcrypto-ex-12.1R2.9 signed by PackageProduction_12_1_0
Mounted jdocs-ex package on /dev/md5...
Verified manifest signed by PackageProduction_12_1_0
Verified jdocs-ex-12.1R2.9 signed by PackageProduction_12_1_0
Mounted jkernel-ex package on /dev/md7...
Verified manifest signed by PackageProduction_12_1_0
Verified jkernel-ex-12.1R2.9 signed by PackageProduction_12_1_0
Mounted jpfe-ex45x package on /dev/md9...
Verified manifest signed by PackageProduction_12_1_0
Verified jpfe-ex45x-12.1R2.9 signed by PackageProduction_12_1_0
Mounted jroute-ex package on /dev/md11...
Verified manifest signed by PackageProduction_12_1_0
Verified jroute-ex-12.1R2.9 signed by PackageProduction_12_1_0
Mounted jswitch-ex package on /dev/md13...
Verified manifest signed by PackageProduction_12_1_0
Verified jswitch-ex-12.1R2.9 signed by PackageProduction_12_1_0
Mounted jweb-ex package on /dev/md15...
Verified manifest signed by PackageProduction_12_1_0
Verified jweb-ex-12.1R2.9 signed by PackageProduction_12_1_0
Executing />Automatic reboot in progress...
Media check on da0 on ex platforms
** /dev/da0s2a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 127501 free (29 frags, 15934 blocks, 0.0% fragmentation)
Computing slice and partition sizes for /dev/da0 ...
** /dev/da0s3e
** Last Mounted on /var
** Phase 1 - Check Blocks and Sizes
INCORRECT BLOCK COUNT I=8099 (20 should be 12)
CORRECT? yes
INCORRECT BLOCK COUNT I=16147 (4 should be 0)
CORRECT? yes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
LINK COUNT FILE I=16147 OWNER=0 MODE=100644
SIZE=0 MTIME=Nov 3 22:17 2016 COUNT 2 SHOULD BE 1
ADJUST? yes
UNREF FILE I=16158 OWNER=0 MODE=140755
SIZE=0 MTIME=Nov 15 18:58 2011
RECONNECT? yes
NO lost+found DIRECTORY
CREATE? yes
** Phase 5 - Check Cyl groups
FREE BLK COUNT(S) WRONG IN SUPERBLK
SALVAGE? yes
SUMMARY INFORMATION BAD
SALVAGE? yes
BLK(S) MISSING IN BIT MAPS
SALVAGE? yes
342 files, 372 used, 126058 free (202 frags, 15732 blocks, 0.2% fragmentation)
***** FILE SYSTEM MARKED CLEAN *****
***** FILE SYSTEM WAS MODIFIED *****
savecore: Reboot reason(s): 0x1: power cycle/failure
No dump exists
** /dev/da0s3d
** Last Mounted on /var/tmp
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
10 files, 77 used, 374001 free (41 frags, 46745 blocks, 0.0% fragmentation)
***** FILE SYSTEM MARKED CLEAN *****
** /dev/da0s4d
** Last Mounted on /config
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
FREE BLK COUNT(S) WRONG IN SUPERBLK
SALVAGE? yes
SUMMARY INFORMATION BAD
SALVAGE? yes
BLK(S) MISSING IN BIT MAPS
SALVAGE? yes
15 files, 15 used, 63132 free (28 frags, 7888 blocks, 0.0% fragmentation)
***** FILE SYSTEM MARKED CLEAN *****
***** FILE SYSTEM WAS MODIFIED *****
ext_id_map: not found
ln: /var/db/dcd.snmp_ix: File exists
Creating initial configuration...mgd: commit complete
Setting initial options: debugger_on_panic=NO debugger_on_break=NO.
Starting optional daemons: .
Doing initial network setup:
.
Initial interface configuration:
additional daemons:.
Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /boot/modules;/modules/peertypeLoading the EX-series platform NETPFE module
kld netpfe drv: ifpfed_eth ifpfed_ml_cmnkld platform: ex_ifpfe if_vcpkld peertype: peertype_hcm peertype_pfem peertype_sfi peertype_slavere grat_arp_on_ifup=YES: net.link.ether.inet.grat_arp_on_ifup: 1 -> 1
ipsec kld.
Doing additional network setup:.
Starting final network daemons:.
setting ldconfig path: /usr/lib /opt/lib
starting standard daemons: cron.
Local package initialization:.
kern.securelevel: -1 -> 1
starting local daemons:.
Thu Nov 3 22:14:09 UTC 2016
Boot media /dev/da0 has dual root support
** /dev/da0s1a
** Last Mounted on /
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
UNREF FILE I=23419 OWNER=root MODE=100644
SIZE=40960 MTIME=Nov 3 22:16 2016
RECONNECT? yes
NO lost+found DIRECTORY
CREATE? yes
UNREF FILE I=23543 OWNER=root MODE=100600
SIZE=40960 MTIME=Nov 3 22:16 2016
RECONNECT? yes
UNREF FILE I=23544 OWNER=root MODE=100644
SIZE=508 MTIME=Nov 3 22:16 2016
RECONNECT? yes
** Phase 5 - Check Cyl groups
FREE BLK COUNT(S) WRONG IN SUPERBLK
SALVAGE? yes
SUMMARY INFORMATION BAD
SALVAGE? yes
BLK(S) MISSING IN BIT MAPS
SALVAGE? yes
1434 files, 51343 used, 130403 free (27 frags, 16297 blocks, 0.0% fragmentation)
***** FILE SYSTEM MARKED CLEAN *****
***** FILE SYSTEM WAS MODIFIED *****
Amnesiac (ttyu0)
login:
ABOUT US:
AVRITEK (avr-sales)helps organizations to safely and profitably offload their excess oroff lease equipment and provides business critical hardware life cycleservices. We specialize in electronics, biotech equipment, enterprisenetworking gear, and audio visual equipment.Please visit ourwebsite or contact us through the Messaging Center for moreinformation regarding our services, resell opportunities, or questionsabout items we have for sale on .PAYMENT:
- Payment is due within 7 days of purchase.
- AVR-Sales accepts payment by PayPal or Credit Card over the phone. Cash payment can be accepted when using local pickup option.
- Sales tax of 7.75% will be applied to all sales within California, unless a valid tax exempt certificate is presented.
- Our system is automatedto open an unpaid item case after 2 days of an unreceived payment.Please contact us if you feel you have received this notice in error orneed to make other payment arrangements.
SHIPPING & RETURNS:
- Shipping stated is for Contiguous 48 United States only.
- Please inquire for shipping charges for all other locations and/or combined shipping.
- Please inquire for alternative shipping services other than what is offered in the listing.
- Alternative shipping services will incur the full shipping charge for the desired service.
- Shipping to Alaska, Hawaii, APO/FPO, Puerto Rico, and other locations may be higher.
- We ship USPS Priority Mail for international shipments. We cannot guarantee we will be able to ship to your specific country.
- For larger items please provide a physical address. PO Boxes may be charged an additional shipping fee.
- Shipping Service will be determined by thelowest pricedservice available.
TERMS OF SALE:
- 30 day warranty does not apply if shipped outside of the U.S.
- If a buyer with a shipping address outside of the continental US makes a purchase without first requesting a shipping quote, AVR-Sales reserves the right to cancel the transaction.
- Items returned for any reason other than misrepresentation will be subject to a20% restocking fee.
- Items specifically stated as sold \"Parts / Repair\" or \"AS-IS\" are not covered under any warranty.
- If an accessory is notspecifically mentioned,it is not included! Power cords are not included.
- AVR-Sales makes no guarantee to the life of batteries unless specifically stated otherwise.
- AVR-Sales documents all serial numbers for items listed & sold.
- response is automated.Please leave +Positive response for your purchase if you would like tohave +Positive response posted on your purchase
CONTACT US:
- You may contact AVR-Sales through the message system .
- Your email will be answered promptly Monday through Friday during normal business hours.
- Emails received on weekends and holidays will be answered the following business day.
DISCLAIMER:Regardless of the origin of the equipment, documentation provided oridentification appearing upon the equipment, the equipment describedand offered here is in no way certified for, recommended for, oroffered for any specific use. The purchaser agrees that the sellershall not be held responsible or liable for any injuries or damages,whether incidental or consequential, associated in any way with theequipment. The purchaser, by purchasing this equipment, indicates theiracknowledgment of, and agreement to the terms of this disclaimer.
DISCLAIMER:Healthcare,Lab, and Life Sciences Equipment: \"The sale of this item may be subjectto regulation by the U.S. Food and Drug Administration and state andlocal regulatory agencies. If so, do not offer on this item unless youare an authorized purchaser. If the item is subject to FDA regulation,I will verify your status as an authorized purchaser of this itembefore shipping of the by SixBit\'s eCommerce Solution
