Juniper Networks EX2200-24P-4G 750-026464 24-Port Gigabit POE Switch 4x SFP Used For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Juniper Networks EX2200-24P-4G 750-026464 24-Port Gigabit POE Switch 4x SFP Used:
$129.97
Juniper Networks EX2200-24P-4G 750-026464 24-Port Gigabit POE Switch 4x SFP Used #E5Up for sale in this sale is a used Juniper networks EX2200-24P-4G switch. This has been defaulted and tested to be in good working order. It will come with a 14-day hardware warranty which will start upon the date of arrival. It shows some signs of wear from transportation. This switch has 24 RJ-45 gigabit POE capable ports on it. It also has four SFP ports on it. This sale WILL NOT INCLUDE any cables, cords, or any other accessories not pictured. I will not be responsible for compatibility or setup issues. Pictures are of the actual item being sold. If it isn't pictured then it isn't included.NOTE: Login is "root" No password is setup.Feel free to check out my other listings for more exciting items.
Free shipping is only for the continental US States. Free shipping is not available for P.O. Boxes, Alaska, Hawaii, or Puerto Rico sorry. Shipping is not available for APO/FPO boxes sorry.
U-Boot 1.1.6 (Mar 26 2011 - 04:38:23)Board: EX2200-24P-4G 4.13
EPLD: Version 04.100311 (0x10)
DRAM: Initializing (512MB)
Flash: 8 MBFirmware Version:01.00.00
USB: scanning bus for devices... 3 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) foundELF file is 32 bit
Consoles: U-Boot consoleFreeBSD/arm U-Boot loader, Revision 1.1
(hmerge svl-junos-pool130.juniper.net, Sat Mar 26 02:07:39 PDT 2011)
Memory: 512MB
bootsequencing is enabled
bootsuccess is set
new boot device = disk0s2:
Loading /boot/defaults/loader.conf
/kernel data=0x7fbae4+0xa5408 syms=[0x4+0xdf250+0x4+0xb6bbf]
Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel]...
Kernel entry at 0x1400100 ...
GDB: debug ports: uart
GDB: current port: uart
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
Copyright (c) 1996-2013, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
JUNOS 11.4R5.7 #0: 2013-01-05 11:55:23 UTC
builder re-use a leaf (all_slot_serialid)!
CPU: Feroceon 88FR131 rev 1 (Marvell core)
WB enabled EABT branch prediction enabled
16KB/32B 4-way Instruction cache
16KB/32B 4-way write-back-locking-C Data cache
real memory = 536870912 (512 MB)
avail memory = 507248640 (483 MB)
SOC: Marvell 88F6281 rev A0, TClock 200MHz
ETHERNET SOCKET BRIDGE initialising
Initializing EXSERIES platform properties ...
mbus0: <Marvell Internal Bus (Mbus)> on motherboard
ic0: <Marvell Integrated Interrupt Controller> at mem 0xf1020200-0xf102023b on m bus0
timer0: <Marvell CPU Timer> at mem 0xf1020300-0xf102032f irq 1 on mbus0
gpio0: <Marvell Integrated GPIO Controller> at mem 0xf1010100-0xf101011f irq 35, 36,37,38,39,40,41 on mbus0
uart0: <16550 or compatible> at mem 0xf1012000-0xf101201f irq 33 on mbus0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> at mem 0xf1012100-0xf101211f irq 34 on mbus0
ehci0: <88F5XXX Integrated USB 2.0 controller> at mem 0xf1050000-0xf1050fff irq 48,19 on mbus0
usb0: EHCI version 1.0
usb0 on ehci0
usb0: USB revision 2.0
uhub0: Marvell EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
uhub1: vendor 0x04cc product 0x1520, class 9/0, rev 2.00/2.00, addr 2
uhub1: single transaction translator
uhub1: 2 ports with 2 removable, self powered
umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 3
mge0: <Marvell Gigabit Ethernet controller> at mem 0xf1072000-0xf1073fff irq 12, 13,14,11,46 on mbus0
mge0: hardware MAC address 28:c0:da:3b:d4:ff
miibus0: <MII bus> on mge0
e1000phy0: <Marvell 88E1118 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
i2c0: <Marvell I2C ARM OnChip Controller> at mem 0xf1011000-0xf101101f irq 29 on mbus0
syspld0: <SYSPLD> on i2c0
8564 rtc0: <8564 RTC> on i2c0
poe0: <POE> on i2c0
cfi0: <SPI flash - 8MB> at mem irq 2 3 on mbus0
mpfe0: <Juniper EX-series Packet Forwarding Engine> at mem 0xf4000000-0xf7ffffff irq 113 on mbus0
pcib0: <Marvell 88F6281 PCI-Express host controller> at mem 0xf1040000-0xf1041ff f,0xe8000000-0xefffffff irq 9 on mbus0
pci0: <PCI bus> on pcib0
Initializing product: 76 ..
bmeb: bmeb_lib_init done 0xc32b4800, addr 0xc1c9b654
bme0:Virtual BME driver initializing
Timecounter "CPU Timer" frequency 200000000 Hz quality 1000
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <ST ST72682 2.10> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C)
Trying to mount root from ufs:/dev/da0s2a
Invalid time in real time clock.
Check and reset the date immediately!
Attaching /packages/jbase via /dev/mdctl...
Mounted jbase package on /dev/md0...
Verified manifest signed by PackageProduction_11_4_0
Verified jboot signed by PackageProduction_11_4_0
Verified jbase-ex-11.4R5.7 signed by PackageProduction_11_4_0
Mounted fips-mode-arm package on /dev/md1...
Verified manifest signed by PackageProduction_11_4_0
Verified fips-mode-arm-11.4R5.7 signed by PackageProduction_11_4_0
Mounted jcrypto-ex package on /dev/md2...
Verified manifest signed by PackageProduction_11_4_0
Verified jcrypto-ex-11.4R5.7 signed by PackageProduction_11_4_0
Mounted jdocs-ex package on /dev/md3...
Verified manifest signed by PackageProduction_11_4_0
Verified jdocs-ex-11.4R5.7 signed by PackageProduction_11_4_0
Mounted jkernel-ex-2200 package on /dev/md4...
Verified manifest signed by PackageProduction_11_4_0
Verified jkernel-ex-2200-11.4R5.7 signed by PackageProduction_11_4_0
Mounted jpfe-ex22x package on /dev/md5...
Verified manifest signed by PackageProduction_11_4_0
Verified jpfe-ex22x-11.4R5.7 signed by PackageProduction_11_4_0
Mounted jroute-ex package on /dev/md6...
Verified manifest signed by PackageProduction_11_4_0
Verified jroute-ex-11.4R5.7 signed by PackageProduction_11_4_0
Mounted jswitch-ex package on /dev/md7...
Verified manifest signed by PackageProduction_11_4_0
Verified jswitch-ex-11.4R5.7 signed by PackageProduction_11_4_0
Mounted jweb-ex package on /dev/md8...
Verified manifest signed by PackageProduction_11_4_0
Verified jweb-ex-11.4R5.7 signed by PackageProduction_11_4_0
Executing reboot in progress...
Media check on da0 on ex platforms
** /dev/da0s2a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 51916 free (28 frags, 6486 blocks, 0.0% fragmentation)
Computing slice and partition sizes for /dev/da0 ...
** /dev/da0s3e
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 62481 free (121 frags, 7795 blocks, 0.2% fragmentation)
savecore: Reboot reason(s): 0x1: power cycle/failure
No dump exists
** /dev/da0s3d
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 188844 free (28 frags, 23602 blocks, 0.0% fragmentation)
** /dev/da0s4d
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 31647 free (47 frags, 3950 blocks, 0.1% fragmentation)
Creating initial configuration...Simple Network Management Protocol process: LIBJNX_SNMP_ENGINE_SCAN_FAILURE: snmp_engine_read: fscanf : /var/db/snmp_engine.db scanning: full_engine_id Error: Unknown error: 0
mgd: commit complete
Setting initial options: debugger_on_panic=NO debugger_on_break=NO.
Starting optional daemons: .
Doing initial network setup:
.
Initial interface configuration:
additional daemons:.
Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> netpfe drv: ifpfed_eth ifpfed_ml_cmnkld platform: ex_ifpfeLoading the EX-series platform NETPFE module
if_vcpkld peertype: peertype_hcm peertype_pfem peertype_sfi peertype_slavere grat_arp_on_ifup=YES: net.link.ether.inet.grat_arp_on_ifup: 1 -> 1
ipsec kld.
Doing additional network setup:.
Starting final network daemons:.
setting ldconfig path: /usr/lib /opt/lib
starting standard daemons: cron.
Local package initialization:.
kern.securelevel: -1 -> 1
starting local daemons:.
Fri Aug 19 16:03:10 UTC 2016
Boot media /dev/da0 has dual root support
** /dev/da0s1a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 52416 free (48 frags, 6546 blocks, 0.1% fragmentation)Amnesiac (ttyu0)login: root--- JUNOS 11.4R5.7 built 2013-01-05 11:55:23 UTC
root@:RE:0%
root@:RE:0% cli
root> show system alarms
No alarms currently activeroot> show chassis hardware
Hardware inventory:
Item Version Part number Serial number Description
Chassis CV0210508315 EX2200-24P-4G
Routing Engine 0 REV 13 750-026464 CV0210508315 EX2200-24P-4G, POE
FPC 0 REV 13 750-026464 CV0210508315 EX2200-24P-4G, POE
CPU BUILTIN BUILTIN FPC CPU
PIC 0 BUILTIN BUILTIN 24x 10/100/1000 Base-T
PIC 1 REV 13 750-026464 CV0210508315 4x GE SFP
Power Supply 0 PS 550W AC
Fan Tray Fan Trayroot> show chassis environment
Class Item Status Measurement
Power FPC 0 Power Supply 0 OK
Temp FPC 0 GEPHY1 OK 20 degrees C / 68 degrees F
FPC 0 GEPHY2 OK 20 degrees C / 68 degrees F
FPC 0 GEPHY3 OK 15 degrees C / 59 degrees F
FPC 0 GEPHY4 OK 20 degrees C / 68 degrees F
FPC 0 GEPHY5 OK 25 degrees C / 77 degrees F
FPC 0 GEPHY6 OK 15 degrees C / 59 degrees F
Fans FPC 0 Fan 1 OK Spinning at normal speed
FPC 0 Fan 2 OK Spinning at normal speed
FPC 0 PSU Fan OK Spinning at normal speedroot> show version
Model: ex2200-24p-4g
JUNOS Base OS boot [11.4R5.7]
JUNOS Base OS Software Suite [11.4R5.7]
JUNOS Kernel Software Suite [11.4R5.7]
JUNOS Crypto Software Suite [11.4R5.7]
JUNOS Online Documentation [11.4R5.7]
JUNOS Enterprise Software Suite [11.4R5.7]
JUNOS Packet Forwarding Engine Enterprise Software Suite [11.4R5.7]
JUNOS Routing Software Suite [11.4R5.7]
JUNOS Web Management [11.4R5.7]
JUNOS FIPS mode utilities [11.4R5.7]root>
