Juniper Networks EX3300-48P 750-034250 48 Port Gigabit Switch POE+ 4x SFP+ 10GbE For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Juniper Networks EX3300-48P 750-034250 48 Port Gigabit Switch POE+ 4x SFP+ 10GbE:
$749.99
Juniper Networks EX3300-48P 750-034250 48 Port Gigabit Switch POE+ 4x SFP+ 10GbE #A3Up for sale in this sale is a used Juniper Networks EX3300-48P networking switch. This has been tested to be in good working order. It will come with a 14-day hardware warranty which will start upon the date of arrival. It shows more than normal signs of wear from transportation. This switch has 48 RJ-45 gigabit POE+ capable ports on it. It also has four 10GbE capable SFP+ ports on it. VCP is disabled on SFP+ ports #2 and #3 to allow them to function like normal SFP+ ports. This sale WILL NOT INCLUDE any cables, cords, or any other accessories not pictured. I will not be responsible for compatibility or setup issues. Pictures are of the actual item being sold. If it isn\'t pictured then it isn\'t included.NOTE: Login is \"root\" No password is setup.
Feel free to check out my other listings for more exciting items.
Free shipping is only for the continental US States. Free shipping is not available for P.O. Boxes, Alaska, Hawaii, or Puerto Rico sorry. Shipping is not available for APO/FPO boxes sorry.U-Boot 1.1.6 (Aug 21 2011 - 01:45:26)Board: EX3300-48P 5.12
EPLD: Version 03.110621 (0x10)
DRAM: Initializing (1GB)
Flash: 8 MB
NAND: 1024 MiBFirmware Version: --- 01.00.00 ---
USB: scanning bus for devices...
Root Hub 0: 2 USB Device(s) found
Root Hub 1: 1 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) foundELF file is 32 bit
Consoles: U-Boot consoleFreeBSD/arm U-Boot loader, Revision 1.1
(builder dagmath.juniper.net, Sun Aug 21 01:24:12 UTC 2011)
Memory: 1024MB
bootsequencing is enabled
bootsuccess is set
new boot device = disk0s1:
Loading /boot/defaults/loader.conf
/kernel data=0x7d0394+0x8f4e8 syms=[0x4+0xdbc10+0x4+0xb275d]
Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel]...
Kernel entry at 0x1400100 ...
GDB: debug ports: uart
GDB: current port: uart
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
Copyright (c) 1996-2011, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
JUNOS 11.3R4.2 #0: 2011-12-23 07:00:04 UTC
builder re-use a leaf (all_slot_serialid)!
CPU: Early Feroceon 88FR571 rev 0 (Marvell core)
WB enabled EABT branch prediction enabled
32KB/32B 4-way Instruction cache
32KB/32B 4-way write-back-locking-C Data cache
real memory = 1073741824 (1024 MB)
avail memory = 1034383360 (986 MB)
SOC: Marvell MV78100, TClock 200MHz
ETHERNET SOCKET BRIDGE initialising
Initializing EXSERIES platform properties ...
mbus0: <Marvell Internal Bus (Mbus)> on motherboard
ic0: <Marvell Integrated Interrupt Controller> at mem 0xf1020200-0xf102023b on mbus0
timer0: <Marvell CPU Timer> at mem 0xf1020300-0xf102032f irq 8 on mbus0
gpio0: <Marvell Integrated GPIO Controller> at mem 0xf1010100-0xf101011f irq 56,57,58,59 on mbus0
uart0: <16550 or compatible> at mem 0xf1012000-0xf101201f irq 12 on mbus0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> at mem 0xf1012100-0xf101211f irq 13 on mbus0
ehci0: <88F5XXX Integrated USB 2.0 controller> at mem 0xf1050000-0xf1050fff irq 72,16 on mbus0
usb0: EHCI version 1.0
usb0 on ehci0
usb0: USB revision 2.0
uhub0: Marvell EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 2
ehci1: <88F5XXX Integrated USB 2.0 controller> at mem 0xf1051000-0xf1051fff irq 72,17 on mbus0
usb1: EHCI version 1.0
usb1 on ehci1
usb1: USB revision 2.0
uhub1: Marvell EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 1 port with 1 removable, self powered
ehci2: <88F5XXX Integrated USB 2.0 controller> at mem 0xf1052000-0xf1052fff irq 72,18 on mbus0
usb2: EHCI version 1.0
usb2 on ehci2
usb2: USB revision 2.0
uhub2: Marvell EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 1 port with 1 removable, self powered
mge0: <Marvell Gigabit Ethernet controller> at mem 0xf1072000-0xf1073fff irq 41,42,43,40,70 on mbus0
mge0: hardware MAC address 40:b4:f0:68:7a:3f
miibus0: <MII bus> on mge0
e1000phy0: <Marvell 88E1310 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
i2c0: <Marvell I2C ARM OnChip Controller> at mem 0xf1011000-0xf101101f on mbus0
8564 rtc0: <8564 RTC> on i2c0
poe0: <POE> on i2c0
i2c1: <Marvell I2C ARM OnChip Controller> at mem 0xf1011100-0xf101111f on mbus0
pcib0: <Marvell MV78100 PCI-Express host controller> at mem on mbus0
pci0: <PCI bus> on pcib0
mpfe0: <Juniper EX-series Packet Forwarding Engine> mem 0xe8000000-0xebffffff irq 112 at device 1.0 on pci0
mpfe0: 0x100000 bytes of rid 0x10 res 3 failed (0, 0xffffffff).
pcib1: <Marvell MV78100 PCI-Express host controller> at mem on mbus0
pci1: <PCI bus> on pcib1
mpfe1: <Juniper EX-series Packet Forwarding Engine> mem 0xec000000-0xefffffff irq 113 at device 1.0 on pci1
mpfe1: 0x100000 bytes of rid 0x10 res 3 failed (0, 0xffffffff).
syspld0 at mem 0xf9000000-0xf90fffff on mbus0
cfi0: <SPI flash - 8MB> at mem irq 1 on mbus0
Initializing product: 115 ..
bmeb: bmeb_lib_init done 0xc4072800, addr 0xc1c59ff0
bme0:Virtual BME driver initializing
Timecounter \"CPU Timer\" frequency 200000000 Hz quality 1000
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <ST ST72682 2.10> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C)
Trying to mount root from ufs:/dev/da0s1a
Attaching /packages/jbase via /dev/mdctl...
Mounted jbase package on /dev/md0...
Verified manifest signed by PackageProduction_11_3_0
Verified jboot signed by PackageProduction_11_3_0
Verified jbase-11.3R4.2 signed by PackageProduction_11_3_0
Mounted jcrypto-ex package on /dev/md2...
Verified manifest signed by PackageProduction_11_3_0
Mounted jdocs-ex package on /dev/md4...
Verified manifest signed by PackageProduction_11_3_0
Mounted jkernel-ex-3300 package on /dev/md6...
Verified manifest signed by PackageProduction_11_3_0
Mounted jpfe-ex33x package on /dev/md8...
Verified manifest signed by PackageProduction_11_3_0
Mounted jroute-ex package on /dev/md10...
Verified manifest signed by PackageProduction_11_3_0
Mounted jswitch-ex package on /dev/md12...
Verified manifest signed by PackageProduction_11_3_0
Mounted jweb-ex package on /dev/md14...
Verified manifest signed by PackageProduction_11_3_0
Executing reboot in progress...
** /dev/da0s1a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 46801 free (33 frags, 5846 blocks, 0.0% fragmentation)
Computing slice and partition sizes for /dev/da0 ...
** /dev/da0s3e
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 62385 free (129 frags, 7782 blocks, 0.2% fragmentation)
savecore: Reboot reason(s): 0x1: power cycle/failure
No dump exists
** /dev/da0s3d
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 170304 free (40 frags, 21283 blocks, 0.0% fragmentation)
** /dev/da0s4d
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 31567 free (39 frags, 3941 blocks, 0.1% fragmentation)
Creating initial configuration...mgd: commit complete
Setting initial options: debugger_on_panic=NO debugger_on_break=NO.
Starting optional daemons: .
Doing initial network setup:
.
Initial interface configuration:
additional daemons:.
Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> netpfe drv:Loading the EX-series platform NETPFE module
ifpfed_eth ifpfed_ml_cmnkld platform: ex_ifpfe if_vcpkld peertype: peertype_hcm peertype_pfem peertype_sfi peertype_slavere grat_arp_on_ifup=YES: net.link.ether.inet.grat_arp_on_ifup: 1 -> 1
ipsec kld.
Doing additional network setup:.
Starting final network daemons:.
setting ldconfig path: /usr/lib /opt/lib
starting standard daemons: cron.
Local package initialization:.
kern.securelevel: -1 -> 1
starting local daemons:.
Sun Sep 11 18:08:02 UTC 2016
Boot media /dev/da0 has dual root support
** /dev/da0s2a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 47362 free (34 frags, 5916 blocks, 0.0% fragmentation)Amnesiac (ttyu0)login: root--- JUNOS 11.3R4.2 built 2011-12-23 07:00:04 UTC
root@:RE:0% cli
{master:0}
root> show system alarms
No alarms currently active{master:0}
root> show chassis hardware
Hardware inventory:
Item Version Part number Serial number Description
Chassis GB0212374202 EX3300-48P
Routing Engine 0 REV 12 750-034250 GB0212374202 EX3300 48-Port POE+
FPC 0 REV 12 750-034250 GB0212374202 EX3300 48-Port POE+
CPU BUILTIN BUILTIN FPC CPU
PIC 0 BUILTIN BUILTIN 48x 10/100/1000 Base-T
PIC 1 REV 12 750-034250 GB0212374202 4x GE/XE SFP+
Power Supply 0 PS 900W AC
Fan Tray Fan Tray{master:0}
root> show chassis environment
Class Item Status Measurement
Power FPC 0 Power Supply 0 OK
Temp FPC 0 CPU OK 35 degrees C / 95 degrees F
FPC 0 EX-PFE1 OK 38 degrees C / 100 degrees F
FPC 0 EX-PFE2 OK 37 degrees C / 98 degrees F
FPC 0 GEPHY1 OK 25 degrees C / 77 degrees F
FPC 0 Fan Exhaust OK 33 degrees C / 91 degrees F
FPC 0 SFP+ PHY OK 25 degrees C / 77 degrees F
FPC 0 Local Sensor OK 30 degrees C / 86 degrees F
Fans FPC 0 Fan 1 OK Spinning at normal speed
FPC 0 Fan 2 OK Spinning at normal speed{master:0}
root> show ex3300-48p
JUNOS Base OS boot [11.3R4.2]
JUNOS Base OS Software Suite [11.3R4.2]
JUNOS Kernel Software Suite [11.3R4.2]
JUNOS Crypto Software Suite [11.3R4.2]
JUNOS Online Documentation [11.3R4.2]
JUNOS Enterprise Software Suite [11.3R4.2]
JUNOS Packet Forwarding Engine Enterprise Software Suite [11.3R4.2]
JUNOS Routing Software Suite [11.3R4.2]
JUNOS Web Management [11.3R4.2]{master:0}
root>
