Juniper Networks EX4200-24F 750-033067 24-port 100/1000Base-X SFP + EX-UM-4SFP For Sale

Juniper Networks EX4200-24F 750-033067 24-port 100/1000Base-X SFP + EX-UM-4SFP
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Buy Now

Juniper Networks EX4200-24F 750-033067 24-port 100/1000Base-X SFP + EX-UM-4SFP:
$769.99

Juniper Networks EX4200-24F 750-033067 24-port 100/1000Base-X SFP + EX-UM-4SFPUp for sale in this sale is a used Juniper EX4200-24F 24 port switch. This has been defaulted and tested to be in good working order. It will come with a 14-day hardware warranty which will start upon the date of arrival. It shows some signs of wear from transportation. There is one 320W power supply, and an EX-UM-4SFP module in this switch. This sale WILL NOT INCLUDE any cables, cords, or any other accessories not pictured. I will not be responsible for compatibility or setup issues. Pictures are of the actual item being sold. If it isn\'t pictured then it isn\'t included.NOTE: Login is \"root\" No password is setup.
Feel free to check out my other listings for more exciting items.
Free shipping is only for the continental US States. Free shipping is not available for P.O. Boxes, Alaska, Hawaii, or Puerto Rico sorry. Shipping is not available for APO/FPO boxes sorry.U-Boot 1.1.6 (Mar 26 2011 - 04:42:33)Board: EX4200-24F 3.6
EPLD: Version 6.1 (0x85)
DRAM: Initializing (1024 MB)
FLASH: 8 MBFirmware Version: --- 01.00.00 ---
USB: scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) foundELF file is 32 bit
Consoles: U-Boot consoleFreeBSD/PowerPC U-Boot bootstrap loader, Revision 2.4
(hmerge svl-junos-pool130.juniper.net, Sat Mar 26 02:46:28 PDT 2011)
Memory: 1024MB
bootsequencing is enabled
bootsuccess is set
new boot device = disk0s2:
Loading /boot/defaults/loader.conf
/kernel data=0xa8c580+0xb0508 syms=[0x4+0x8f950+0x4+0xd2741]
Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel]...
Kernel entry at 0x800000c0 ...
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1996-2013, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
JUNOS 12.3R3.4 #0: 2013-06-14 00:08:02 UTC
builder re-use a leaf (all_slot_serialid)!
Timecounter \"decrementer\" frequency 50000000 Hz quality 0
cpu0: Freescale e500v2 core revision 2.2
cpu0: HID0 memory = 1047527424 (999 MB)
avail memory = 1025544192 (978 MB)
Security policy loaded: JUNOS MAC/pcap (mac_pcap)
Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot)
Security policy loaded: Junos MAC/veriexec (mac_veriexec)
MAC/veriexec fingerprint module loaded: SHA256
MAC/veriexec fingerprint module loaded: SHA1
ETHERNET SOCKET BRIDGE initialising
Initializing EXSERIES properties ...
nexus0: <PPC e500 Nexus device>
ocpbus0: <on-chip peripheral bus> on nexus0
openpic0: <OpenPIC in on-chip peripheral bus> iomem 0xfef40000-0xfef600b3 on ocp bus0
memctl0: <mpc85xx memory ECC monitor> iomem 0xfef20000-0xfef20e5b,0xfef02000-0xf ef02e5b irq 32,34 on ocpbus0
i2c0: <MPC85XX OnChip i2c Controller> iomem 0xfef03000-0xfef03014 irq 59 on ocpb us0
i2c1: <MPC85XX OnChip i2c Controller> iomem 0xfef03100-0xfef03114 irq 59 on ocpb us0
uart0: <16550 or compatible> iomem 0xfef04500-0xfef0450f irq 58 on ocpbus0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> iomem 0xfef04600-0xfef0460f irq 58 on ocpbus0
lbc0: <Freescale 8533 Local Bus Controller> iomem 0xfef05000-0xfef05fff,0xff0000 00-0xffffffff irq 22 on ocpbus0
cb fpga: un-supported RE/board:36
cfi0: <AMD/Fujitsu - 8MB> iomem 0xff800000-0xffffffff on lbc0
cb fpga: un-supported RE/board:36
syspld0 iomem 0xff000000-0xff00ffff on lbc0
tsec0: <eTSEC ethernet controller> iomem 0xfef24000-0xfef24fff irq 45,46,50 on o cpbus0
tsec0: hardware MAC address 5c:5e:ab:62:39:3f
miibus0: <MII bus> on tsec0
e1000phy0: <Marvell 88E1112 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
pcib0: <Freescale MPC8544 PCI host controller> iomem 0xfef08000-0xfef08fff,0xf00 00000-0xf3ffffff on ocpbus0
pci0: <PCI bus> on pcib0
pci0: <serial bus, USB> at device 18.0 (no driver attached)
ehci0: <Philips ISP156x USB 2.0 controller> mem 0xf0001000-0xf00010ff irq 22 at device 18.2 on pci0
usb0: EHCI version 1.0
usb0: <Philips ISP156x USB 2.0 controller> on ehci0
usb0: USB revision 2.0
uhub0: Philips EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 2
pcib1: <Freescale MPC8544 PCI Express host controller> iomem 0xfef0a000-0xfef0af irq 42 on ocpbus0
pci1: <PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 0.0 on pci1
pci2: <PCI bus> on pcib2
mpfe0: <Juniper EX-series Packet Forwarding Engine> mem 0xa4000000-0xa40fffff,0x a0000000-0xa3ffffff irq 19 at device 0.0 on pci2
mpfe_adcr_shadow_alloc: allocated idx: 0
pcib3: <Freescale MPC8544 PCI Express host controller> iomem 0xfef0b000-0xfef0bf irq 43 on ocpbus0
pci3: <PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 0.0 on pci3
pci4: <PCI bus> on pcib4
mpfe1: <Juniper EX-series Packet Forwarding Engine> mem 0xb4000000-0xb40fffff,0x b0000000-0xb3ffffff irq 18 at device 0.0 on pci4
mpfe_adcr_shadow_alloc: allocated idx: 1
idma0: <mp85xxx DMA Controller> iomem 0xfef21000-0xfef21300 irq 36 on ocpbus0
Initializing product: 40 ..
bmeb: bmeb_lib_init done 0x82b56800, addr 0x80a8da08
bme0:Virtual BME driver initializing
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <ST ST72682 2.10> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C)
Kernel thread \"wkupdaemon\" (pid 42) exited prematurely.
Trying to mount root from ufs:/dev/da0s2a
Attaching /packages/jbase via /dev/mdctl...
Mounted jbase package on /dev/md0...
Verified manifest signed by PackageProduction_12_3_0
Verified jboot signed by PackageProduction_12_3_0
Verified jbase-ex-12.3R3.4 signed by PackageProduction_12_3_0
Mounted fips-mode-powerpc package on /dev/md2...
Verified manifest signed by PackageProduction_12_3_0
Verified fips-mode-powerpc-12.3R3.4 signed by PackageProduction_12_3_0
Mounted jcrypto-ex package on /dev/md4...
Verified manifest signed by PackageProduction_12_3_0
Verified jcrypto-ex-12.3R3.4 signed by PackageProduction_12_3_0
Mounted jdocs-ex package on /dev/md6...
Verified manifest signed by PackageProduction_12_3_0
Verified jdocs-ex-12.3R3.4 signed by PackageProduction_12_3_0
Mounted jkernel-ex package on /dev/md8...
Verified manifest signed by PackageProduction_12_3_0
Verified jkernel-ex-12.3R3.4 signed by PackageProduction_12_3_0
Mounted jpfe-ex42x package on /dev/md10...
Verified manifest signed by PackageProduction_12_3_0
Verified jpfe-ex42x-12.3R3.4 signed by PackageProduction_12_3_0
Mounted jroute-ex package on /dev/md12...
Verified manifest signed by PackageProduction_12_3_0
Verified jroute-ex-12.3R3.4 signed by PackageProduction_12_3_0
Mounted jswitch-ex package on /dev/md14...
Verified manifest signed by PackageProduction_12_3_0
Verified jswitch-ex-12.3R3.4 signed by PackageProduction_12_3_0
Mounted jweb-ex package on /dev/md16...
Verified manifest signed by PackageProduction_12_3_0
Verified jweb-ex-12.3R3.4 signed by PackageProduction_12_3_0
Executing reboot in progress...
Media check on da0 on ex platforms
** /dev/da0s2a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 27618 free (10 frags, 3451 blocks, 0.0% fragmentation)
** /dev/da0s3e
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 60518 free (262 frags, 7532 blocks, 0.4% fragmentation)
Computing slice and partition sizes for /dev/da0 ...
savecore: Reboot reason(s): 0x2: watchdog
No dump exists
** /dev/da0s3d
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 188841 free (33 frags, 23601 blocks, 0.0% fragmentation)
** /dev/da0s4d
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 31647 free (31 frags, 3952 blocks, 0.1% fragmentation)
Creating initial configuration...mgd: Running FIPS Self-tests
veriexec: no fingerprint for file=\'/sbin/kats/cannot-exec\' fsid=74 fileid=51404 uid=0 pid=534
mgd: FIPS Self-tests Passed
mgd: commit complete
Setting initial options: debugger_on_panic=NO debugger_on_break=NO.
Starting optional daemons: .
Doing initial network setup:
.
Initial interface configuration:
additional daemons:.
Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /boo netpfe drv: ifpfed_eth ifpfed_ml_cmnkld platform: ex_ifpfeLoading the EX-ser ies platform NETPFE module
if_vcpkld peertype: peertype_hcm peertype_pfem peertype_sfi peertype_slavere gr at_arp_on_ifup=YES: net.link.ether.inet.grat_arp_on_ifup: 1 -> 1
ipsec kld.
Doing additional network setup:.
Starting final network daemons:.
setting ldconfig path: /usr/lib /opt/lib
starting standard daemons: cron.
Local package initialization:.
kern.securelevel: -1 -> 1
starting local daemons:set cores for group access
.
Fri Jun 14 03:00:01 UTC 2013
Boot media /dev/da0 has dual root support
** /dev/da0s1a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 27618 free (10 frags, 3451 blocks, 0.0% fragmentation)Amnesiac (ttyu0)login: root--- JUNOS 12.3R3.4 built 2013-06-14 00:08:02 UTC
root@:RE:0% cli
{master:0}
root> show system alarms
No alarms currently active{master:0}
root> show chassis hardware
Hardware inventory:
Item Version Part number Serial number Description
Chassis BR0211096490 EX4200-24F
Routing Engine 0 REV 06 750-033067 BR0211096490 EX4200-24F
FPC 0 REV 06 750-033067 BR0211096490 EX4200-24F
CPU BUILTIN BUILTIN FPC CPU
PIC 0 BUILTIN BUILTIN 24x 100 Base-FX/1000 Base-X
PIC 1 REV 04 711-021270 AR0210051520 4x GE SFP
Power Supply 0 REV 04 740-020957 AT0511074239 PS 320W AC
Fan Tray Fan Tray{master:0}
root> show chassis environment
Class Item Status Measurement
Power FPC 0 Power Supply 0 OK
FPC 0 Power Supply 1 Absent
Temp FPC 0 CPU OK 36 degrees C / 96 degrees F
FPC 0 Uplink Conn OK 28 degrees C / 82 degrees F
FPC 0 SFP#1 OK 23 degrees C / 73 degrees F
FPC 0 SFP#12 OK 24 degrees C / 75 degrees F
Fans FPC 0 Fan 1 OK Spinning at full speed
FPC 0 Fan 2 OK Spinning at full speed
FPC 0 Fan 3 OK Spinning at full speed{master:0}
root> show ex4200-24f
JUNOS Base OS boot [12.3R3.4]
JUNOS Base OS Software Suite [12.3R3.4]
JUNOS Kernel Software Suite [12.3R3.4]
JUNOS Crypto Software Suite [12.3R3.4]
JUNOS Online Documentation [12.3R3.4]
JUNOS Enterprise Software Suite [12.3R3.4]
JUNOS Packet Forwarding Engine Enterprise Software Suite [12.3R3.4]
JUNOS Routing Software Suite [12.3R3.4]
JUNOS Web Management [12.3R3.4]
JUNOS FIPS mode utilities [12.3R3.4]{master:0}
root>


Buy Now

Popular Tutorials