When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
SN P8471. Checked and tested by certified Cisco tech. All commands executed on actual unit.
Guaranteed non DOA for 90 days.
Booting.
Trying Config: CMD:0x40
Available Memory on Channel0 [2048MB]
Skipping clock programming - DRAM channels 0 and 2 share a PLL.
Trying Config: CMD:0x40
Available Memory on Channel2 [2048MB]
Partition [0,1ÿ
Booting...
Trying Config: CMD:0x40
Available Memory on Channel0 [2048MB]
Skipping clock programming - DRAM channels 0 and 2 share a PLL.
Trying Config: CMD:0x40
Available Memory on Channel2 [2048MB]
Partition [1,1]
DRAM MATS Passed
U-Boot 1.1.6 (Build time: Jan 25 2012 - 07:52:02)
CPU Frequency = 1200000000Hz
DRAM: 183 MB
Flash: 8 MB
PCIE: [4RCx1] Mode Detected
USB: scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
Net: gmac0, gmac1, gmac2, gmac3, gmac4, gmac5, gmac6, gmac7
ELF file is 32 bit
Loading .text @ 0x8f000078 (243004 bytes)
Loading .rodata @ 0x8f03b5b4 (13912 bytes)
Loading .rodata.str1.4 @ 0x8f03ec0c (15880 bytes)
Loading set_Xcommand_set @ 0x8f042a14 (96 bytes)
Loading .rodata.cst4 @ 0x8f042a74 (16 bytes)
Loading .data @ 0x8f043000 (5572 bytes)
Loading .data.rel.ro @ 0x8f0445c4 (120 bytes)
Loading .data.rel @ 0x8f04463c (136 bytes)
Clearing .bss @ 0x8f0446c8 (8304 bytes)
## Starting application at 0x8f000078 ...
Resetting state for secondary cpus 0xffe....DONE
Consoles: U-Boot console
FreeBSD/MIPS U-Boot bootstrap loader, Revision 0.1
(builder at kessuth.juniper.net, Wed Jan 25 06:08:01 UTC 2012)
Memory: 183MB
Loading /boot/defaults/loader.conf
/kernel data=0xb0d538+0x119f144 [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel]...
Kernel entry at 0x801000c0 ...
Sanity Check pass on prom_info @ 0x81d22f68
init regular console
GDB: debug ports: sio
GDB: current port: sio
KDB: debugger backends: ddb gdb kdm
KDB: current backend: ddb
Running in PARTITIONED TLB MODE
Copyright (c) 1996-2015, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
JUNOS 14.1X53-D17.1 #0: 2015-07-26 23:34:29 UTC
builder at debug.mpsafenet forced to 0 as ipsec requires Giant
can't re-use a leaf (fxseries_simulation)!
JUNOS 14.1X53-D17.1 #0: 2015-07-26 23:34:29 UTC
builder at memory = 14566330044776458 (10305343585129594880K bytes)
avail memory = 2748239872 (2620MB)
FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
Security policy loaded: Junos MAC/veriexec (mac_veriexec)
Security policy loaded: JUNOS MAC/pcap (mac_pcap)
Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot)
MAC/veriexec fingerprint module loaded: SHA1
MAC/veriexec fingerprint module loaded: SHA256
netisr_init: !debug_mpsafenet, forcing maxthreads from 12 to 1
ETHERNET SOCKET BRIDGE initialising
Reboot reason(s): 0x400:bios auto recovery reset
fpga driver loaded, 0 (null)
FXPCI warning: hw.pci.enable_static_config is not set.
Creating PCI Scan thread
: RMI's XLR CPU Rev. 0.3 with no FPU implemented
L1 Cache: I size 32kb(32 line), D size 32kb(32 line), eight way.
L2 Cache: Size 1024kb, eight way
16550A, console
usb0: EHCI version 1.0
usb0: USB revision 2.0
uhub0: 2 ports with 2 removable, self powered
Timecounter "mips" frequency 1200000000 Hz quality 0
Timecounter "xlr_pic_timer" frequency 66666666 Hz quality 1
Loading Redundant LT driver
Loading the NETPFE fc module
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
dedranel0 tahtr eaumassd "w-skuipdaemmon"0 b(ups id 0 targe7t 70) leuxni t0e
G dpar0e:m a<tAuTrPe lAyF.8
SSGH-JP4 1100> Fixed Direct Access SCSI-4 device
da0: 40.000MB/s transfers
da0: 7678MB (15724544 512 byte sectors: 255H 63S/T 978C)
Trying to mount root from ufs:/dev/da0s1a
WARNING: / was not properly dismounted
Attaching /packages/jbase via /dev/mdctl...
Mounted jbase package on /dev/md0...
Verified manifest signed by PackageDevelopmentEc_2015
veriexec: accepting signer: PackageDevelopmentEc_2015
Verified jboot signed by PackageDevelopmentEc_2015
veriexec: accepting signer: PackageDevelopmentEc_2015
Verified jbase-14.1X53-D17.1 signed by PackageDevelopmentEc_2015
veriexec: accepting signer: PackageDevelopmentEc_2015
Mounted jkernel package on /dev/md2...
Verified manifest signed by PackageDevelopmentEc_2015
veriexec: accepting signer: PackageDevelopmentEc_2015
Verified jkernel-qfx-14.1X53-D17.1 signed by PackageDevelopmentEc_2015
veriexec: accepting signer: PackageDevelopmentEc_2015
Mounted jpfe package on /dev/md4...
Verified manifest signed by PackageDevelopmentEc_2015
veriexec: accepting signer: PackageDevelopmentEc_2015
Verified jpfe-qfx-35xx-14.1X53-D17.1 signed by PackageDevelopmentEc_2015
veriexec: accepting signer: PackageDevelopmentEc_2015
Mounted jdocs package on /dev/md6...
Verified manifest signed by PackageDevelopmentEc_2015
veriexec: accepting signer: PackageDevelopmentEc_2015
Verified jdocs-qfx-14.1X53-D17.1 signed by PackageDevelopmentEc_2015
veriexec: accepting signer: PackageDevelopmentEc_2015
Mounted jroute package on /dev/md8...
Verified manifest signed by PackageDevelopmentEc_2015
veriexec: accepting signer: PackageDevelopmentEc_2015
Verified jroute-qfx-14.1X53-D17.1 signed by PackageDevelopmentEc_2015
veriexec: accepting signer: PackageDevelopmentEc_2015
Executing jcrypto package on /dev/md10...
Verified manifest signed by PackageDevelopmentEc_2015
veriexec: accepting signer: PackageDevelopmentEc_2015
Verified jcrypto-qfx-14.1X53-D17.1 signed by PackageDevelopmentEc_2015
veriexec: accepting signer: PackageDevelopmentEc_2015
Mounted jswitch package on /dev/md12...
Verified manifest signed by PackageDevelopmentEc_2015
veriexec: accepting signer: PackageDevelopmentEc_2015
Verified jswitch-qfx-14.1X53-D17.1 signed by PackageDevelopmentEc_2015
veriexec: accepting signer: PackageDevelopmentEc_2015
Mounted py-base-xlr package on /dev/md14...
Verified manifest signed by PackageDevelopmentEc_2015
veriexec: accepting signer: PackageDevelopmentEc_2015
Verified py-base-xlr-14.1X53-D17.1 signed by PackageDevelopmentEc_2015
veriexec: accepting signer: PackageDevelopmentEc_2015
swapon: adding /dev/da0s3b as swap device
sysctl: unknown oid 'dev.ad.1'
Checking sanity of /var/tmp [ /dev/da0s3d ] ... done (full)
Disabling soft update on /var/tmp [ /dev/da0s3d ] ... done
Checking sanity of /var [ /dev/da0s1f ] ... done (full)
Disabling soft update on /var [ /dev/da0s1f ] ... done
Checking sanity of /config [ /dev/da0s3e ] ... done (full)
Disabling soft update on /config [ /dev/da0s3e ] ... done
Checking sanity of /var/shared [ /dev/da0s3f ] ... done (full)
Disabling soft update on /var/shared [ /dev/da0s3f ] ... done
Checking sanity of /var/rundb [ /dev/da0s3g ] ... done (full)
Disabling soft update on /var/rundb [ /dev/da0s3g ] ... done
Checking sanity of / [ /dev/da0s1a ] ... done (full)
Disabling soft update on / [ /dev/da0s1a ] ... dSone
ystem booted successfully to single user
Automatic reboot in progress...
df: /var/rundb: No such file or directory
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 128890 free (26 frags, 16108 blocks, 0.0% fragmentation)
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 103661 free (157 frags, 12938 blocks, 0.1% fragmentation)
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 514895 free (39 frags, 64357 blocks, 0.0% fragmentation)
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 1248979 free (35 frags, 156118 blocks, 0.0% fragmentation)
ln: /mfs/var/sdb/sdb: File exists
Creating initial configuration...mgd: error: Cannot open configuration file: /config/juniper.conf
mgd: warning: activating factory configuration
mgd: commit complete
Setting initial options: debugger_on_panic=NO debugger_on_break=NO.
Starting optional daemons: kdm.
Doing initial network setup:.
Initial interface configuration:
additional daemons:.
Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> netpfe drv: ifpfed_eth ifpfed_lt ifpfed_ml_cmn ifpfed_ppeer ifpfed_svcs ifpfed_vtkld platform: dc_ifpfeLoading the DC Platform NETPFE module
kld peertype: peertype_fxpc peertype_hcm peertype_sfi peertype_slavere grat_arp_on_ifup=YES: net.link.ether.inet.grat_arp_on_ifup: 1 -> 1
ipsec kld.
Doing additional network setup:.
Starting final network daemons:.
Loading Online Diag module...
machdep.bootsuccess: 0 -> 1
package_name2: not found
hw.dcf.auto_upgrade_enabled: 0 -> 1
setting ldconfig path: /usr/lib /opt/lib
starting standard daemons: cron.
Local package initialization: kdm.
kern.securelevel: -1 -> 1
starting local daemons:set cores for group access
.
Fri Aug 24 10:20:33 UTC 2018
amnesiac (ttyd0)
login: root
<rroot@:LC:0% cli
warning: This chassis is operating in a non-master role as part of a virtual-chassis (VC) system.
warning: Use of interactive commands should be limited to debugging and VC Port operations.
warning: Full CLI access is provided by the Virtual Chassis Master (VC-M) chassis.
warning: The VC-M can be identified through the show virtual-chassis status command executed at this console.
warning: Please logout and log into the VC-M to use CLI.
{linecard:0}
root>show chassis hardware
Hardware inventory:
Item Version Part number Serial number Description
Chassis
Pseudo CB 0
Fan Tray 0 QFX3500 Fan Tray, Front to Back Airflow
Fan Tray 1 QFX3500 Fan Tray, Front to Back Airflow
Fan Tray 2 QFX3500 Fan Tray, Front to Back show chassis hardware extensive
Hardware inventory:
Item Version Part number Serial number Description
Chassis
Jedec Code: 0x0000 EEPROM Version: 0x00
Assembly ID: 0x0000 Assembly Version: 00.00
Date: 00-00-0000 Assembly Flags: 0x00
Board Information Record:
Address 0x00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
I2C Hex Data:
Address 0x00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Address 0x10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Address 0x20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Address 0x30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Address 0x40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Address 0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Address 0x60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Address 0x70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Pseudo CB 0
Fan Tray 0 QFX3500 Fan Tray, Front to Back Airflow
FRU Model Number: QFX3500-FAN-AFI
Fan Tray 1 QFX3500 Fan Tray, Front to Back Airflow
FRU Model Number: QFX3500-FAN-AFI
Fan Tray 2 QFX3500 Fan Tray, Front to Back Airflow
FRU Model Number: show system license
root> show show chassis request system halt
warning: This command will halt all the members.
If planning to halt only one member use the member option
Halt the system ? [yes,no] (no) yes
*** System shutdown message from roota@ ***
System going down in 1 minute
Shutdown at Fri May 4 23:38:41 2018.
[pid 1238]
message System shutdown message from root@ ***
System going down in 30 seconds
*** FINAL System shutdown message from root@ ***
System going down IMMEDIATELY
MWaiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `vnlru_mem' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...5 1 0 1 1 0 0 0 0 done
syncing disks... All buffers synced.
Uptime: 7m59s
recorded reboot as normal shutdown
The operating system has halted.
Please press any key to reboot.
Popular Tutorials