Kingston 4 GB DIMM 1333 MHz PC3-10600 DDR3 SDRAM Memory (KVR1333D3N9/4G) 4GB RAM For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Kingston 4 GB DIMM 1333 MHz PC3-10600 DDR3 SDRAM Memory (KVR1333D3N9/4G) 4GB RAM:
$7.50
Used but in working conditionDESCRIPTIONThis document describes ValueRAM\'s 512M x 64-bit (4GB)DDR3-1333 CL9 SDRAM (Synchronous DRAM), 2Rx8 memorymodule, based on sixteen 256M x 8-bit DDR3-1333 FBGAcomponents. The SPD is programmed to JEDEC standardlatency DDR3-1333 timing of 9-9-9 at 1.5V. This 240-pin DIMMuses gold contact fingers. The electrical and mechanicalspecifications are as follows:FEATURES• JEDEC standard 1.5V (1.425V ~1.575V) Power Supply• VDDQ = 1.5V (1.425V ~ 1.575V)• 667MHz fCK for 1333Mb/sec/pin• 8 independent internal bank• Programmable CAS Latency: 9, 8, 7, 6• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock• Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)• 8-bit pre-fetch• Burst Length: 8 (Interleave without any limit, sequential withstarting address “000” only), 4 with tCCD = 4 which does notallow seamless read or write [either on the fly using A12 orMRS]• Bi-directional Differential Data Strobe• Internal(self) calibration: Internal self calibration through ZQpin (RZQ : 240 ohm ± 1%)• On Die Termination using ODT pin• Average Refresh Period 7.8us at lower than TCASE 85°C,3.9us at 85°C < TCASE < 95°C• Asynchronous Reset• PCB: Height 0.740” (18.75mm), double sided componentDoc
