When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Checked and tested by certified Cisco tech. All commands executed on actual unit.
Guaranteed non DOA for 90 days.
Router#show inventory
NAME: \"SM subslot 1/0\", DESCR: \"UCS-E140D-M1/K9 - UCSE DW Module\"
PID: UCS-E140D-M1/K9 , VID: V02, SN: FOC17237YMK
NAME: \"SM subslot 1/0\", DESCR: \"UCS-E140D-M1/K9 - UCSE DW Module\"
PID: UCS-E140D-M1/K9 , VID: V02, SN: FOC17201VF7
Router#ucse subslot 1/0 status detailed
CPU info
Name Cores Version
------------ -------- CPU1 4 Intel(R) Xeon(R) CPU E5-2418L 0 @ 2.00GHz
Memory info
Name Capacity Channel Speed (MHz) Channel Type
-------------------- --------------- ------------------- ---------------
Node0_Dimm0 16384 MB 1333 DDR3
Node0_Dimm1 16384 MB 1333 DDR3
Node0_Dimm2 Not Installed Unknown Unknown
Hard drive info
Slot Number Controller Status Manufacturer Model Drive Firmware Coerced Size Type SED
----------- ---------- ---------------------- -------------- -------------- -------------- -------------- ----- -----
1 SLOT-5 System SEAGATE ST9600005SS 0002 571250 MB HDD true
2 SLOT-5 System SEAGATE ST9600005SS 0002 571250 MB HDD true
3 SLOT-5 System SEAGATE ST9600005SS 0002 571250 MB HDD true
Virtual drive info
PCI card info
Network Setting
IPv4 Address: 192.168.1.254
IPv4 Netmask: 255.255.255.0
IPv4 Gateway: 192.168.1.1
NIC Mode: shared_lom
NIC Redundancy: none
NIC Interface: console
Router#show platform
Chassis type: ISR4351/K9
Slot Type State Insert time (ago)
--------- ------------------- --------------------- -----------------
1/0 UCS-E140D-M1/K9 booting 00:03:59
Slot Type State Insert time (ago)
--------- ------------------- --------------------- -----------------
1/0 UCS-E140D-M1/K9 booting 00:04:14
Router#show diag subslot 1/0 eeprom detail
SPA EEPROM data for subslot 1/0:
EEPROM version : 4
Compatible Type : 0xFF
Controller Type : 1889
Hardware Revision : 1.0
PCB Part Number : 73-13714-06
Top Assy. Part Number : 800-35858-02
Board Revision : C0
Deviation Number : 135699
Fab Part Number : 28-9981-03
Fab Version : 03
PCB Serial Number : FOC17237YMK
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Product Identifier (PID) : UCS-E140D-M1/K9
Version Identifier (VID) : V02
CLEI Code : IPUCBEJBTA
Base MAC Address : F8 72 EA 95 4F 32
MAC Address block size : 10
Environment Monitor Data : 40 17 CA 43 00 8C
Platform features : 02 03 02 8C 00 00 00 00
01 01 05
SPA EEPROM data for subslot 1/0:
EEPROM version : 4
Compatible Type : 0xFF
Controller Type : 1889
Hardware Revision : 1.0
PCB Part Number : 73-13714-06
Top Assy. Part Number : 800-35858-02
Board Revision : C0
Deviation Number : 134444
Fab Part Number : 28-9981-03
Fab Version : 03
PCB Serial Number : FOC17201VF7
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Product Identifier (PID) : UCS-E140D-M1/K9
Version Identifier (VID) : V02
CLEI Code : IPUCBEJBTA
Base MAC Address : F8 72 EA 95 37 5E
MAC Address block size : 10
Environment Monitor Data : 40 17 CA 43 00 8C
Platform features : 02 03 02 8C 00 00 00 00
01 01 05
Router#show hw-module subslot all oir
Module Model Operational Status
------------- -------------------- ------------------------
subslot 1/0 UCS-E140D-M1/K9 booting
Module Model Operational Status
------------- -------------------- ------------------------
subslot 1/0 UCS-E140D-M1/K9 booting
Router#hw-module session 1/0
Establishing session connect to subslot 1/0
To exit, type ^a^q
picocom v1.4
port is : /dev/ttyDASH0
flowcontrol : none
baudrate is : 9600
parity is : none
databits are : 8
escape is : C-a
noinit is : no
noreset is : no
nolock is : yes
send_cmd is : ascii_xfr -s -v -l10
receive_cmd is : rz -vv
Terminal login: bios detail
BIOS:
BIOS Version: \"UCSED.1.5.0.1 (Build Date: 10/29/2012)\"
Boot Order: HDD
FW Update/Recovery Status: None, OK
Unknown#show chassis detail
Chassis:
Power: on
Power Button: unlocked
IOS Lockout: unlocked
Serial Number: FOC17032XGB
Product Name: E140D
PID : UCS-E140D-M1/K9
UUID: Description:
Unknown#show cimc detail
CIMC:
Firmware Version: 1.0(4.20130322130001)
Current Time: Wed Jan 24 22:27:27 2018
Boot-loader Version: for using picocom
Router#hw-module subslot 1/0 stop
Proceed with stop of module? [confirm]
Router#
*Jan 24 23:16:57.864: %SPA_OIR-6-OFFLINECARD: SPA (UCS-E140D-M1/K9) offline in subslot 1/0
*Jan 24 23:16:57.864: %IOSXE_OIR-6-SOFT_STOPSPA: SPA(UCS-E140D-M1/K9) stopped in subslot 1/0, interfaces disabled
Popular Tutorials