Super Micro Computer H8DM3-2, dual Socket F, AMD CPU Server Motherboard For Sale

Super Micro Computer H8DM3-2, dual Socket F, AMD CPU Server Motherboard

This item has been shown 1575 times.

Buy Now

Super Micro Computer H8DM3-2, dual Socket F, AMD CPU Server Motherboard:

Super Micro Computer H8DM3-2, dual Socket F, AMD CPU Server Motherboard

Description :

You are offerding ona New pull from server with I/O shield

Super Micro Computer H8DM3-2, dual Socket F, AMD CPU Server Motherboard

  • H8DM3-2 (Standard Retail Pack)
  • H8DM3-2 (Bulk Pack)
Physical Stats Form Factor
  • Extended ATX
  • 12" x 13.05" (30.5cm x 33.2cm)
Processor/Chipset CPU
  • Dual 1207-pin Socket F
  • Supports up to two Six-Core / Quad-Core / Dual-Core AMD Opteron™ 2000 Series processors
  • HT3.0 Link support ^
  • nVidia MCP55 Pro
  • AMD 8132
System Memory Memory Capacity
  • 8x 240-pin DIMM sockets support up to
    64GB DDR2 800/667/533/400 MHz SDRAM
  • For Single CPU: Memory must be populated in CPU1 DIMMs only
  • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
  • Dual channel memory bus
Memory Type
  • DDR2 800/667/533/400MHz Reg. ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 256 MB, 512 MB, 1GB, 2GB, 4GB, 8GB
Memory Voltage
  • 1.8V only
On-Board Devices SAS
  • LSI SAS1068E *
  • RAID 0, 1, 10 support
  • (Optional: AOC-IButton68) RAID 5 support
  • nVidia MCP55 Pro SATA2 3.0Gbps Controller
  • 6 SATA2 Ports
  • nVidia RAID 2.0
  • SATA RAID 0, 1, 0+1, 5 JBOD Support
  • Support for Intelligent Platform Management Interface v.2.0
  • 200-pin IPMI slot (SIMLP)
  • (Optional: AOC-SIMLP-B(+) R 3.00)
  • (Optional: AOC-SIMLP-3(+) R 3.00) with 3rd LAN support
  • RMM (Remote Management Module)
  • (Card not included)
Network Controllers
  • nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • ATI ES1000 Graphics Controller
    16MB Graphics & VGA port
Super I/O
  • Winbond 83627HF
Input / Output SAS
  • Eight SAS / SATA (internal) ports
  • Up to 8 SAS / SATA hard drives supported
  • 6 SATA2 ports
  • Single EIDE channel support up to two UDMA IDE devices
  • Supports UDMA Mode 5
  • Supports PIO Mode 4
  • Supports ATA 100/133
  • 1 Floppy port; 1.44 MB support
  • 2 RJ45 LAN ports
  • Up to 6 USB Ports 2.0 Compliant, 1.1 Compatible
  • 2 Rear Ports
  • 4 Internal Headers
  • 1 VGA port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 1 Fast UART 16550 serial port
  • 1 serial port header
Parallel Port
  • 1 ECP / EPP parallel port
  • 1 SATA DOM power connector
Expansion Slots PCI-Express
  • 2 x8 PCI-e slots
  • 1 x4 PCI-e (in a x8 physical slot)
  • 1 SEPC (Supermicro extended Power Connector) slot for 2U active riser cards w/ a power extension (i.e. CSE-RR2UE-AX)
  • 1 64-bit 133MHz PCI-X (3.3V) slots
  • 2 64-bit 133/100MHz PCI-X (3.3V) slots
  • IPMI 2.0 expansion slot
Chassis ( Optimized for H8DM3-2 ) 2U Chassis
  • CSE-825TQ-R700LPB
Tower / 4U Rackmount
  • CSE-745TQ-R800B
Important Chassis Notes
  • To ensure system stability, a 550W (minimum) ATX power supply
    [ 4-pin (+12V), 8-pin (+12V) and 24-pin are required]
Server(s) ( with H8DM3-2 ) Model(s)
  • AS -2021M-32RV
  • AS -4021M-32R
System BIOS BIOS Type
  • 8Mb Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 2.0
  • USB Keyboard Support
  • SMBIOS 2.3
Management Software
  • Optional IPMI (Intelligent Platform Management Interface) 2.0
  • Super Doctor III
  • Watch Dog
Power Configurations
  • ACPI Power Management
  • Main Switch Override Mechanism
  • Wake-On-Ring (WOR) header
  • Wake-On-LAN (WOL) header
  • Keyboard Wakeup from Soft-Off
  • Power-on mode control for AC power loss recovery
  • Internal/External modem remote ring-on
PC Health Monitoring CPU
  • Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V Standby, VBAT
  • CPU switching voltage regulator
  • Total up to 8-fan status tachometer monitoring
  • Up to six 3-pin and two 4-pin fan headers
  • Status monitor for speed control
  • 3-pin fan support
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connectors
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • I2C Temperature Sensing Logic
  • CPU / System Overheat LED
  • +5V Standby Alert LED
Other Features
  • Chassis Intrusion Detection
  • Chassis Intrusion Header
  • Chipkill Support
Operating Environment / Compliance RoHS

  • RoHS Compliant 5/6, Server Exemption
Environmental Specifications
  • Operating Temperature:
    10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
    -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
    8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
    5% to 95% (non-condensing)
OS Compatibility • Please see our OS Compatibility Chart Regulatory FCC
  • Passed to meet FCC standard requirement

Shipping :

Delivery time normally takes 2-7 business days in the USA depending what carrier you choose. International shipment will take upto 14 working days or longer. For international customer we do not cover any custom fees. It's your responsibilities for any fees associated with your purchase. We keep all the serial #s inhouse for verify returns. PLEASE READ CAREFULLY, DO NOT offer IF YOU DON'T AGREE WITH OUR TERMS! THANK YOU VERY MUCH!

Payment :

We accept PayPal. PayPal is preferred. Please pay within 3 days of sale closed. We ship to PayPal confirmed address only or your payment may have refunded. All sales are final. For Shipment and tracking # will be send within 24 hours of payment received. Thanks!

Click to Enlarge Click to Enlarge Click to Enlarge

inkfrog terapeak

inkFrog Analytics

Buy Now

Popular Tutorials