HPE Proliant Microserver Gen10 - 32GB RAM, 2 x 4TB SATA, 240GB SSD, Plus More For Sale
This item has been shown 188 times.
HPE Proliant Microserver Gen10 - 32GB RAM, 2 x 4TB SATA, 240GB SSD, Plus More:
HPE ProLiant Microserver Gen10
AMD Opteron X3421 CPU (2.1 - 3.4GHz, 4 CPU Cores, 8 Graphics Cores, 2MB L2 Cache
- 2 x 16GB PC4-2400 DDR4 UDIMMS (32GB of usable RAM)
- 2 x 4TB 7200 RPM SATA HDD
- 1 x 240GB SATA SSD
- 1 x Dual Port HPE 1Gb PCI Ethernet Network Card (4 x 1Gb Ethernet ports in total)
- 1 x HP 4K1455 PCI-E 512MB SAS RAID Controller Card + Battery (Not installed)
- 2 x DisplayPort to HDMI Adapters for dual digital monitor output
- Power cord (of course!)
Works perfectly fine. Runs all flavors of Linux, Windows 7 - 10, ESXi 5.5 through 7.0 Update 2, Windows Server (tested with 2008 R2 through 2019).
Was my home lab server but I've since expanded and want this to go to a good home. It's a fast and quiet server.
Network controllerEmbedded Broadcom BCM5720 dual port Gbe LOMExpansion slotsExpansion SlotTechnologyBus WidthConnector WidthForm FactorNotes1PCIe 3.0X8X8Low profileOpen-end connector to support up to x16 PCIe card2PCIe 3.0X1X4Low profileOpen-end connector to support up to x16 PCIe cardThe Gen10 controller naming framework has been updated to simplify identification as depicted below.Embedded storage controllerMarvell 88SE9230 PCIe to SATA 6Gb/s controllerNOTE:Supports RAID 0/1/10 only. No FBWC support.InterfacesVideo
1 Rear VGA port
2 Rear display ports 1.2
USB 2.0 ports3 total (2 rear, 1 internal)USB 3.0 ports4 total (2 rear, 2 front)Network RJ-45 (Ethernet) 2Industry standardcompliance
ACPI V5.0 compliant
PCIe 3.0 compliant
EMC class B
SATA 6 Gb/s
System fansOne (1) non-redundant system fan shipped standard.