Nortel Avaya Ethernet Routing Switch 4524GT-PWR - POE - 24 ports Managed Switch For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Nortel Avaya Ethernet Routing Switch 4524GT-PWR - POE - 24 ports Managed Switch:
$29.99
Ethernet Routing Switch 4524GT-PWR(Nortel/Avaya)
The Ethernet Routing Switch 4524GT-PWR provides 24 ports of 10/100/1000BASE-T with support for IEEE 802.3af PoE, including 4 x Combo 10/100/1000BASE-T or 100/1000BASE-SFP Uplinks ports.
This makes the ERS 4524GT-PWR ideally suited for use as a Wiring Closet LAN Switch in contemporary Enterprise Desktop deployment scenarios, where Gigabit Ethernet is regarded as a strategic requirement. The support for full Standards-based Power-over-Ethernet positions the ERS 4524GT-PWR for use in convergence-centric networks.
Key Features:
- Ability to mix and match with other ERS 4500 Switches in the same Resilient Stack for flexibility and scalability
- Feature-rich product with enabling functionality delivering secure, always-on access to business-critical applications
- High-performance Switch architecture and Stacking performance delivering up to 320Gbps
- Medium-density 10/100/1000 Copper ports for edge connectivity
- Four Combo 10/100/1000 Copper or 100/1000 SFP uplinks ports per Switch for versatile uplink options
- IEEE 802.3af Power-over-Ethernet available on all link ports, with full Class 3 support (via external RPS 15) for IP Phones, Wireless Access Points, and other PoE-powered devices
Features & Benefits
- IP Local and Static Routing
- Nortel Automatic QoS
- Customizable Auto-Negotiation Advertisements (CANA)
- Multi-Link Trunking (6 Groups of up to 4 Links)
- Distributed Multi-Link Trunking (DMLT)
- Distributed Link Aggregation Groups (802.3ad LAG)
- Virtual Link Aggregation Control Protocol (VLACP)
- Nortel Multiple Spanning Tree Groups
- Single IP Address for Stack management
- Resilient Fail-Safe Stacking
- Automatic Unit Replacement (Configuration & Software)
- DSCP-based Recognition, Marking and Re-Coloring
- Ingress and Egress Port Mirroring
- Broadcast and Multicast Rate limiting per Port
- ASCII Configuration File
- Web, NNCLI, JDM
- SSHv2 and SNMPv3 Secure Management Support
- Automatic Detection Automatic Configuration (ADAC)
- 802.1X Single Host Single Authentication
- 802.1X Single Host Multiple Authentication
- 802.1X Multiple Host Multiple Authentication
- 802.1X/Non-EAP Guest VLAN
- 802.1X/Non-EAP (NEAP)
- 802.1X/Non-EAP Last Assigned VLAN
- Nortel Secure Network Access (SNA) solution
- DHCP Snooping
- Dynamic ARP Inspection (DAI)
- IP Source Guard (IPSG)
- BPDU Filtering
- Stack Health Check
- Backup and Restore Switch Software & Configuration Files
- USB Interface for Configuration & Software Storage
- Disable USB & Console Command Ports
Technical SpecificationsGeneral Specifications
- 100BASE-FX ports: 24 MTRJ ports per 4526FX Switch
- 10/100BASE-TX Ethernet ports: 24/48 per 4500T Switch
- 10/100/1000BASE-T Ethernet ports: 24/48 per 4500GT Switch
- SFP Gigabit slots: 2-4 per 4500 Switch
- XFP 10 Gigabit slots: 2 per 4526GTX Switch
- SFP support: T, SX, LX, XD & ZX CWDM, BX, 100FX & T1 (selected Models only)
- XFP support: SR, LRM, LR, ZR
- Resilient Stacking: up to 8 units or 384/400 ports per Stack
- Stacking ports: 2 built-in HiStack ports per Switch
- Total Stacking capacity: up to 320Gbps
- Switch packet throughput: 6.6 - 138Mpps
- Switch capacity: 48.8 - 184Gbps
- Concurrent VLANs: 256
- MAC Addresses: 8,000
- Jumbo Frame Support on all Gigabit & 10 Gigabit Ethernet ports
IEEE & IETF Standards Compliance
- IEEE 802.1Q VLANs
- IEEE 802.1p Traffic Class Expediting
- IEEE 802.1D MAC Bridges (Spanning Tree Protocol)
- IEEE 802.1w Rapid Reconfiguration of Spanning Tree
- IEEE 802.1s Multiple Spanning Trees
- IEEE 802.1V VLAN Classification by Protocol and Port
- IEEE 802.1X Ethernet Authentication Protocol
- IEEE 802.1AB Link Layer Discovery Protocol
- IEEE 802.1AB (LLDP) MED & Location TLV
- IEEE 802.3 10BASE-T Ethernet
- IEEE 802.3u 100BASE-TX Fast Ethernet
- IEEE 802.3u 100BASE-FX Fast Ethernet
- IEEE 802.3u Auto-negotiation
- IEEE 802.3z Gigabit Ethernet
- IEEE 802.3x Flow Control
- IEEE 802.3ab 1000BASE-T Ethernet
- IEEE 802.3ab 1000BASE-SX Ethernet
- IEEE 802.3ab 1000BASE-LX Ethernet
- IEEE 802.3ab 1000BASE-ZX Ethernet
- IEEE 802.3ab 1000BASE-XD Ethernet
- IEEE 802.3ab 1000BASE-BX Ethernet
- IEEE 802.3ad Link Aggregation
- IEEE 802.3ae 10Gb/s Ethernet
- RFC 768 User Datagram Protocol (UDP)
- RFC 783 Trivial File Transfer Protocol (TFTP)
- RFC 791 / 950 Internet Protocol (IP)
- RFC 792 Internet Control Message Protocol (ICMP)
- RFC 793 Transmission Control Protocol (TCP)
- RFC 826 Address Resolution Protocol (ARP)
- RFC 854 Telnet Server and Client
- RFC 894 Transmission of IP Datagrams over Ethernet Networks
- RFC 951 / 1452 Bootstrap Protocol (BOOTP)
- RFC 1027 Proxy ARP
- RFC 1112 Internet Group Management Protocol v1
- RFC 1157 Simple Network Management Protocol (SNMP)
- RFC 1213 MIB for Network Management of TCP/IP-based Internets
- RFC 1215 SNMP Traps Definition
- RFC 1271 / 1575 / 2819 Remote Network Monitoring MIB
- RFC 1350 TFTP Protocol
- RFC 1354 IP Forwarding Table MIB
- RFC 1361 / 1769 Simple Network Time Protocol (SNTP)
- RFC 1442 SNMPv2
- RFC 1450 Management Information Base for SNMPv2
- RFC 1492 Terminal Access Controller Access Control System
- RFC 1493 Bridge MIB
- RFC 1573 / 2863 Interfaces Group of MIB-II
- RFC 1643 / 2665 Definitions of Managed Objects for the Ethernet-like Interface Types
- RFC 1812 Requirements for IP Version 4 Routers
- RFC 1901 Introduction to Community-based SNMPv2
- RFC 1905 / 3416 Protocol Operations for SNMPv2
- RFC 1906 / 3417 Transport Mappings for SNMPv2
- RFC 1907 / 3418 Management Information Base for SNMPv2
- RFC 1945 HTTP v1.0
- RFC 2011 SNMP v2 MIB for IP
- RFC 2012 SNMP v2 MIB for TCP
- RFC 2013 SNMP v2 MIB for UDP
- RFC 2030 SNTP v4 for IPv4, IPv6 and OSI
- RFC 2096 IP Forwarding Table MIB
- RFC 2131 Dynamic Host Configuration Protocol (DHCP)
- RFC 2138 Remote Authentication Dial In User Service (RADIUS)
- RFC 2236 Internet Group Management Protocol v2
- RFC 2452 IP Version 6 MIB for the TCP
- RFC 2454 IP Version 6 MIB for the UDP
- RFC 2460 Internet Protocol, Version 6 (IPv6) Specification
- RFC 2463 ICMPv6 for the IPv6 Specification
- RFC 2464 Transmission of IPv6 Packets over Ethernet Networks
- RFC 2466 MIB for IP Version 6: ICMPv6 Group
- RFC 2474 Differentiated Services Support
- RFC 2475 Architecture for Differentiated Service
- RFC 2526 Reserved IPv6 Subnet Anycast Addresses
- RFC 2570 / 3410 Network Management Framework
- RFC 2571 / 3411 Architecture for Describing SNMP Management Frameworks
- RFC 2572 / 3412 Message Processing and Dispatching SNMP
- RFC 2573 / 3413 SNMP Applications
- RFC 2574 / 3414 View-based Access Control Model for SNMP
- RFC 2575 / 3415 View-based Access Control Model (VACM) for SNMP
- RFC 2576 / 3584 Coexistence of v1, v2, v3 of Network Management Framework
- RFC 2597 Assured Forwarding PHB Group
- RFC 2598 Expedited Forwarding PHB
- RFC 2660 HTTPS (Secure Web Server)
- RFC 2674 Q-Bridge MIB
- RFC 2737 Entity MIBv2
- RFC 2865 Remote Authentication Dial In User Service (RADIUS)
- RFC 2866 RADIUS Accounting
- RFC 2868 RADIUS Attributes for Tunnel Protocol Support
- RFC 2932 IPv4 Multicast Routing MIB
- RFC 3046 DHCP Relay Agent Information Option
- RFC 3576 IEEE 802.1X Security Extensions
- RFC 3621 Power Ethernet MIB
- RFC 3748 Extensible Authentication Protocol (EAP)
- RFC 3826 AES Cipher Algorithm in SNMP
- RFC 4022 TCP-MIB
- RFC 4113 UDP-MIB
- RFC 4188 Definitions of Managed Objects for Bridges
- RFC 4293 Management Information Base for the Internet Protocol
- RFC 4363 Managed Objects for Bridges
Power-over-Ethernet Specifications
- 802.3af compliant with Power classification support
- Power delivery via Signal Pair
- Maximum 15.4Watts per Port
- Maximum DTE Power AC: 320-370 watts
- Maximum DTE Power AC & RPS 15: 740 watts
Electrical Specifications
- Power Supply: AC 100-240V, 50-60Hz
- Input Current at 110V: 1.3A - 7.1A
- Input Current at 220V: 0.7A - 3.6A
- Max rated power consumption: 150W - 580W
- Typical power consumption: 55W - 470W
Dimensions
- Width: 438.2mm (17.25in)
- Height: 1RU 43.7mm (1.72in)
- Depth: 368.3mm (14.5in)
- Weight: 5kg (11lb) - 6.4kg (14lb)
Environmental Specifications
- Operating temperature: 0 to 50 degrees C
- Storage temperature: -25 to 55 degrees C
- Relative humidity: 5% to 85% non-condensing
- Peak noise level: 37.2 - 43.6dBA
- Thermal rating: 188 - 788BTU/hr
- Calculated MTBF: 214,542 - 312,001 Hours
Safety Agency Approvals
- IEC 60950 International CB certification
- EN 60950 European certification
- UL60950 US certification
- CSA22.2, #60950 Canadian certification
- NOM Mexican certification
Electromagnetic Emissions & Immunity
- CISPR22, Class A/CISPR24 International certification
- EN55022, Class A/EN55024 European certification
- FCC, Past 15, Class A US certification
- ICES-003, Class A Canadian certification
- AN/NZS 3548 Australian/NZ certification
- BSMI CNS 13438, Class A, Taiwanese certification
- KCC No. 2001-116, Korean certification
- VCCI Class A, Japanese certification